Reference: 2379.02.3356
Trimmer / cable adjuster barrel thread Ø8mm / sheath tip for Ø8mm to bike and other (free brake nut)
Competition piece machined in the mass Ø8mm threading for sheath tip Ø8mm.
Reference: 2379.02.3356
Competition piece machined in the mass Ø8mm threading for sheath tip Ø8mm.
Reference: 01486_72
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 320765
Ideal in case of breakage, loss or simply wear and tear on your necklace.
Reference: 06 3140
Perfect for settling your squish.
Reference: 6561
A good quality sheath that will allow you to match it to your machine.
Banner
There are 52 products.
Active filters
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 01104_00
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 129517
The only wealth screws for your PHBG!
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 16962_00
The replacement cover single screw for your carburettors DELLORTO PHBG Racing Red and Black Edition.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 09450
The replacement float for your carbs, ideal in the event of a fuel leak!
Reference: 1298
The little room in which hangs the starter cable.
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 53002
A pack to switch your PHBG carburettors choke lever to cable choke!
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 53027_00
The idle screw with its spring for your PHBG carburettors!
Reference: S5809
Excellent in the event of a problem or a leak in your carburetor.
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!