
Reference: 121692
Locking nut (against nut) for DELLORTO cable tensioning screw
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Banner
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 09812
A mass-machined brass cap for your carburetors with aluminum tank or racing black edition!
Reference: 53031.78
The spare cover with screws for your DELLORTO PHBG carburettors except Racing Red and Black Edition.
Reference: 09506
Bar, axle, float holding rod for DELLORTO carb.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 02838_00
Ideal in case of problem, breakage or loss of your old part!
Reference: 1280
Ideal for refurbishment or for loss.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Ideal in case of leakage for a good quality repair at low price.