Reference: CIL-1041-S
125cc BARIKIT kit for Yamaha YZ 125 motorcycle from 2005 to 2018
Very good quality kit at a very low price for your YS 125 2T from 2005 to 2018!
Banner
BARIKIT is a Spanish brand that offers a comprehensive catalog of various engine parts for scooters and motorcycles old and new!
BARIKIT is present since the late 90s in Spain, BARIKIT was originally a large piston manufacturer competition or replacing the original, little by little they have diversified into crankshafts, valves, cylinders, cylinder heads, exhaust ... These various parts are outsourced recess and not manufactured by the house BARIKIT, however they innovate in specific outgoing and friendly products with affordable prices, in addition, the material selected by BARIKIT is always good standard! They have also evolved out their range BRK composed of very exclusive piece that are not found in other brands or cylinders FACTORY prepared a hand!
For us the main strength of this Spanish brand remains the diversity of the range, certainly many of their products are found elsewhere as they are not necessarily the primary manufacturers, however there are home crankshafts long runs of all types millet even films for Derbi engines euro 2 specific with balancer, we also find like-cylinder AIRSAL but higher diagrams, with yokes a plot with specific higher-end pistons, there are even thermal group old as MINARELLI RV4, Peugeot 103 and other models!
address:
CAMI PARETS 20
Polígon
El Congost
Telephone (Spain):
938401198
Fax (Spain):
938402295
Website:
www.barikit.com
There are 399 products.
Reference: CIL-1041-S
Very good quality kit at a very low price for your YS 125 2T from 2005 to 2018!
Reference: CIL-1026-S
The 125cc BARIKIT kit for ROTAX 122 engine.
Reference: CIL-1036-S
The 125cc BARIKIT kit with WOSSNER piston for ROTAX 122 engine.
Reference: KCR-24
A pack of crankshaft spy seals with high quality C3 bearings, ideal for refurbishing and reinforcing your low engine!
Reference: KCR-36
A pack of crankshaft spy seals with high quality C4 bearings, ideal for the refurbishment and reinforcement of your low engine!
Reference: CIL-726
A kit cast iron 50cc better than the original for your old motorcycles HONDA 50cc liquid-cooled.
Reference: EQ-741
In the type of DR RACING and black TOP PERFORMANCES, here BARIKIT Fonte for DERBI euro 2 GPR50 ... with mounted cylinder head O-ring, 5 transfers, oval exhaust boosters, solid cast iron piston ... two segments.
Reference: EQ-739
The version of 70cc RACING BARIKIT, with ups charts! More powerful, but does not neglect the couple, high motor guy with head Metrakit maintained by 2 screws and studs, solid cast iron cylinder, 5 transfers, oval exhaust with booster, dual piston segments ...!
Reference: EQ-927-S
A kit that looks a lot like the AIRSAL, comes with a yoke! A very good 70cc torquey and powerful enough for your SUZUKI RMX, SMX!
Reference: CIL-710
A very torquey 70cc with a very low price for your old motorcycles 50cc HONDA!
Reference: EQ-992-S
The racing version of the 75cc Ø48mm BARIKIT. Mono-segment with breech block.
Reference: PG-01
A throttle grip to fast draw CROSS ... kind of good quality plastic in black color!
Reference: CIL-926-S
A version almost identical to AIRSAL but with a special piston!
Reference: CUL-738
The replacement head for kits cast BARIKIT Racing 39,90mm diameter model with 2 points of additional hardware.
Reference: CUL-740
The replacement head for cast kits BARIKIT Sport 39,90mm in diameter, mounted model with an entourage of O-ring.
Reference: JAC-07
The shim needed for crankshaft race long 42 / 43mm on minarelli horizontal!
Reference: JUN-809C
Ideal for disassembly / reassembly of your high engine BARIKIT 125cc!
Reference: JUN-908
Ideal for disassembly / reassembly of your high engine BARIKIT 250cc in diameter 78mm
Reference: JAC-09
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Reference: TUB-04
Special intake pipe for large diameter carburetors from 26 to 28mm like OKO ... 360 ° swiveling and ideal for large configurations.
Reference: CUL-748
The replacement cylinder head for the BARIKIT Racing cast iron kits in diameter 39.90mm on DERBI EURO 3 and 4.