Reference: 2379.02.3356

DOMINO

Trimmer / cable adjuster barrel thread Ø8mm / sheath tip for Ø8mm to bike and other (free brake nut)

Competition piece machined in the mass Ø8mm threading for sheath tip Ø8mm.

Price €11.03
Home in 2 to 5 days
More
Home in 2 to 5 days

Reference: 01486_72

DELLORTO

Jet principal for carburettor DELLORTO small step, net 5mm, length 8mm, genuine (certified Inc)

Certified Sprinkler DELLORTO INC! Choose the true quality DELLORTO!

Price €3.33
Home in 2 to 5 days
More
Home in 2 to 5 days

Reference: 320765

CGN

CGN self-tightening clamps (choice of diameter) for gasoline / vacuum / lung / oil hose ...

Ideal in case of breakage, loss or simply wear and tear on your necklace.

Price €0.83
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 06 3140

MALOSSI

Head gasket Ø45.5 to 46mm 70cc MALOSSI 0.45mm thickness for Peugeot 103 / fox & wallaroo

Perfect for settling your squish.

Price €2.49
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 6561

CGN

Standard sheath Ø5mm TRANSFIL (Ø2.5mm inside) for brake cable, accelerator, clutch ... Choice of color

A good quality sheath that will allow you to match it to your machine.

Price €1.66
At home in 2 to 5 days
More
At home in 2 to 5 days
All best sellers
  • Banner

Valves, valve box, admission kit, strips DERBI euro 1 & 2
Valves, valve box, admission kit, strips DERBI euro 1 & 2

Valves, valve box, admission kit, strips DERBI euro 1 & 2

Here you find all the intake valves, a box flaps, flaps slats ... For motorcycle engine DERBI euro 1 & 2! Ideal for increasing its power, torque, acceleration, speed, approaching the most of the power system and improving its passage. valves of the slats must resonate more or less late, soft blades and in low quality (steel clicking ...) leave very early passing the gas mixture in good quantity but bridera (will resonate frequency) too early! That is why we prefer to use a fiber lamella or more carbon to properly erase the harmful vibration by increasing the thickness, we can get in clamping frequency later and thus free up system! Generally it is recommended: -for an original configuration 0.25mm -for an average configuration 0.30mm 0.35mm -for a high speed configuration -and finally to a very high 0.40mm scheme configuration. Obviously, some parameters such as the advance ignition, exhaust, diagram, the diameter of the carburetion and diffuser system will vary these parameters! The slat type will also vary (3 strips on each side or 2 strips joined together or not ...).

There are 33 products.

Showing 1-21 of 33 item(s)

Active filters

Reference: 27 7366.K0

MALOSSI

2 boards of Karbonit 100X100mm for MALOSSI competition valves

Two boards 100X100mm in MALOSSI Karbonit available in 0,30, 0,35 and 0,40mm. It is cut and therefore adapts to all 2-stroke motor vehicles. Thickness choices.

Price €16.66
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 27 7366.C0

MALOSSI MHR

2 carbon boards 100X100mm for MALOSSI MHR competition valves

MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!

Price €33.33
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 213.0599

POLINI

2 carbon boards 110X110mm for POLINI competition valves

Boards for the manufacture of POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, thickness of your choice!

Price €21.66
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 2013800

MALOSSI MHR

Adjustable pipe admission kit + valves vl6 MHR Ø19 / 21mm viton racing for 50cc minarelli am6 / derbi motorcycle

The high-end and ultra-efficient Viton version!

Price €62.49
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 2013801

MALOSSI MHR

Adjustable pipe admission kit + valves vl6 MHR Ø26 / 28mm viton racing for 50cc minarelli am6 / derbi motorcycle

A very high-end special for large carburations on MINARELLI AM6, DERBI ...

Price €62.49
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: LA-812-C

BARIKIT

BARIKIT BIAXIAL competition valves carbon slats minarelli am6 / DERBI

High-end competition valves, aluminum base with carbon slats!

Price €49.99
At home in 2 to 10 days
More
At home in 2 to 10 days

Reference: 213.0051

POLINI

Carbon valves POLINI with diffuser DERBI euro 1/2/3

Excellent high performance valves and high quality POLINI motorcycle DERBI 50cc.

Price €48.33
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 480755

TEKNIX

Check valves TEKNIX fiberglass minarelli am6 / DERBI

Quality valves for guaranteed performance!

Price €14.16
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 508300

DOPPLER

Cylinder base wedge DOPPLER thickness 1mm for DERBI euro 3 and 4

Ideal for raising your diagrams or for installing a 42mm long stroke crankshaft on the DERBI euro 3 and 4 engine. Digitally machined aluminum wedge.

Price €8.33
At your place in 2 to 10 days
More
At your place in 2 to 10 days

Reference: 494635

DOPPLER

DOPPLER 5mm Red or Black DPCPLER pipe shim with screws for minarelli am6 / DERBI / peugeot 103 casings malossi ...

Optimize the performance of your mécaboite!

Price €13.33
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 208471

DOPPLER

DOPPLER ER2 fiber reinforced valves derbi euro 1, 2 & 3

High quality valves offering additional performance clearly felt thanks to its reinforced fiber slats, specific slat stop and its diffuser!

Price €41.66
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 2712431.C0

MALOSSI

Game 6 carbon MALOSSI strips 0.30 / 0.35 and 0.40 mm for valves origin "adige" DERBI euro 1/2 & 3

Excellent set of plates to preserve the original box bonded ADIGE DERBI improving it with a true high quality carbon blades and can select its thickness!

Price €24.99
Home in 2 to 5 days
More
Home in 2 to 5 days

Reference: LC.44.35

ITALKIT

intake kit flexible pipe + flaps / slats ITALKIT COMPETITION Ø28 / 35mm for motorcycle Minarelli AM6

One of the best price / quality ratio for carburetor 28 to 35mm. Reserved for connoisseurs!

Price €73.33
You in 2 to 5 days
More
You in 2 to 5 days

Reference: LC.12.40

ITALKIT

Intake kit flexible pipe + valves / slats ITALKIT COMPETITION Ø28 / 35mm for motorcycle Derbi

One of the best value for carburetor in 28 to 35mm. Reserved for connoisseurs!

Price €73.33
at home in 5 to 10 days
More
at home in 5 to 10 days

Reference: 23120.20

PARMAKIT

Kit admission PARMAKIT Ø30mm (valve + flexible pipe) for DERBI euro 1, 2 & 3

Complete intake kit and high-performance 30mm diameter for your mécaboite DERBI.

Price €58.03
Home in 2 to 10 days
More
Home in 2 to 10 days

Reference: CL02

MVT ENGINE

Kit flexible admission pipe Viton + valves MVT Ø19 / 21mm DERBI euro 1, 2 & 3

A model of competition that you will greatly improve the performance of your DERBI.

Price €55.56
Home in 2 to 5 days
More
Home in 2 to 5 days

Reference: 2715810.C0

MALOSSI MHR

MALOSSI MHR VL18 carbon valves for minarelli am6 / DERBI / peugeot 103 malossi ...

The famous MHR Vl18 valves! Guaranteed performance!

Price €58.33
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 27 4235.K0

MALOSSI

MALOSSI VL6 carbon or karbonit valves with the choices for minarelli am6 / DERBI / peugeot 103 malossi casings ...

Valves that are suitable for small and large configurations.

Price €29.91
Product available with different options
More
Product available with different options

Reference: 440168

DOPPLER

Set of 2 blades DOPPLER ER2 0,35mm fiber for valves DERBI of origin

Ideal to increase its performance at lower cost by preserving its high quality original valve box!

Price €9.16
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 468220

DOPPLER

Set of 2 blades DOPPLER ER2 reinforced fiber for valves DOPPLER ER2 on derbi euro 1, 2 & 3

Essential to maintain your valves DOPPLER ER2 on motorcycle 50cc engine Derbi.

Price €9.16
At home in 2 to 5 days
More
At home in 2 to 5 days

Reference: 284777

DOPPLER

Set of 2 DOPPLER CARBON 0.35mm fiber slats for original DERBI valves

Set of slats to improve your carburetion while preserving your original high quality gearbox!

Price €16.66
At home in 2 to 5 days
More
At home in 2 to 5 days

Follow us on Facebook