PEUGEOT 103
MBK 51
MOTOBECANE
PIAGGIO CIAO / VELOFAX
PEUGEOT FOX
HONDA CAMINO, PX, PXR...
DERBI VARIANT.png)
SOLEX
PUCH
MINARELLI AM6
Low-pass exhaust pipe
High-pass exhaust pipe
DERBI Euro 3 / 4 / 5
DERBI Euro 1 & 2
MINARELLI P4 & P6.png)
MINARELLI RV6, RV5, RV4, RV3
SUZUKI SMX, RMX, TSX
YAMAHA TY, RD, DT, MX
HONDA MB, MT, MTX, MBX, NSR R
YAMAHA CHAPPYBanner
The famous V.FORCE competition reed valves with 4 reeds for Minarelli AM6, SX 65 and DERBI ! Guaranteed performance!
Here are the METRAKIT V4X reed valves. This Spanish brand has successfully developed a revised and improved version of the V Force type 3 reed valve (the best in 2-stroke racing). It will offer you maximum acceleration and torque while maintaining excellent top-end power. Unlike the TPR, which favors the entire low end of the rev range (0 to 10,000 rpm), this one, fitted with four single-reed valves, favors the high rev range from 10,000 to 15,000 rpm.
2 outer fins, 2 inner fins, all in high-end carbon, recommended with a carburetion of Ø24mm to 30mm, it is also supplied with a round d.30mm diffuser (venturi) which will prevent loss in gas diffusion.
Even aesthetically, it's truly a success. The V-FORCE system allows for two distinct resonant frequencies, one at low RPM and one at high RPM! This top-of-the-line equipment comes at a price, but with such high-quality gear, you can be sure of what you're buying.
This system is already highly regarded in 125/250cc 2-stroke motocross competitions. We regret that other, more rigid reeds are not supplied and are not available pre-cut on the market!
Designed for MINARELLI AM6, KTM SX 65 and DERBI , they also fit POLINI or ATHENA big valve reed valves for Minarelli vertical engines, and ATHENA / OMEGA crankcases. The Eurocilindro kit for MBK 51 also easily adapts to Derbi-type bolt patterns, MALOSSI and MG crankcases for Peugeot 103 engines, etc., with only a very minor modification to the mounting holes.
Mounts on :
-All DERBI EURO 1, 2, 3, 4, 5 engines...
-Minarelli am3, 4, 5, 6... Euro 1, 2, 3...
-Peugeot 103 with MALOSSI crankcases
-Peugeot 103 or MBK 51 with POLINI crankcases and RRD adapter spacer
-MBK 51 / motobecane av10 with EURO CILINDRO / OMEGA housings ...
- YAMAHA BWS / MBK BOOSTER with POLINI or ATHENA big valve
… and KTM SX 65 before 2008 without modification.
Reference: 9937820
The famous V.FO RC E competition valves with 8 slats for minarelli AM6 and DERBI ! Guaranteed performance!
Reference: 494634
Optimize the performance of your mécaboite!
Reference: LC.44.400
The must of the admission kits for large configuration with carburetor in 28 to 35mm. Reserved for connoisseurs! Hyper short, super diffusion, carburetor up to 35mm, vibration scrub ... Simply the best.
Reference: CL01
A competition model that will allow you to greatly improve the performance of your AM6.
Reference: 279479
DOPPLER competition valves with special blue fiber slats!
Reference: 2712430.C0
A set of six high-end blades to have the most accurate setting.
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 116040E
Quality valve for your MINARELLI AM6 engine, DERBI EURO 2, 3 and 4.
Reference: 99VLAM0100
High quality racing valves for MOTORPARTS
Reference: 213.0526
High quality carbon slats. Set of 0.30 and play of 0.35mm.
Reference: CL 10
A competition model that will allow you to greatly improve the performance of your 2 wheels.
Reference: 440167
High quality slats to better exploit the high revs of your motorcycle 50cc am6 engine!
Reference: 480755
Quality valves for guaranteed performance!
Reference: LP.44.3
A set of 2 improved slats for motorbike with minarelli am6 engine.
Reference: 511244
Quality valve for your MINARELLI AM6, DERBI EURO 2, 3 and 4 engine.
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
