Banner
A MALOSSI carburettor kit pre-adjusted and delivered ready to be mounted on a pipe with flexible sleeve Ø28.6mm on vespa 50 SPECIAL 2T.
Not approved on public roads, reserved for competition.
Ideal on a scooter with a sport exhaust and why not a kit, an ignition ...
Here is the carburetor kit including the famous MALOSSI PHBL 25mm torque to be installed on the crankcase, delivered with the Ø24X28.6 DIVING intake pipe on your VESPA 50 SPECIAL 2T.
The kit comes with a sport air filter specifically designed at VESPA. And the cables for the assembly! It is already pre-set, you can fine-tune the settings if desired but it is not even mandatory.
Designed for cable choke like the original. Adjustment screws specifically placed for VESPAs!
This complete and pre-set kit will be delivered to you as in the photo with :
-2 STUDS M 6x18 for POT.
-GAS CABLE studied at the length of the vehicle
-CABLE STARTER
-DIVE HOSE GAME 160 ° long. 50mm - threaded ext. M6x0.75x7.5 / internal M5x0.75x15mm
-PIPE ADM. Ø 24x28.6 DIVING
-CABLE-CABLExACCELERAT. Ø 5.5x9
Mounts on :
VESPA SPECIAL 50 2T
Reference: 37 3640
MALOSSI cable clamp Ø5.5 X 9mm. Ideal for a secure attachment.
Reference: 19 3298E
Set of 2 M6 studs which can be used for many applications.
Reference: 201.1704
A carburettor pre-set and delivered ready to be mounted on your original vespa 50 pipe.
Reference: 1610855
A MALOSSI carburettor kit with valves, pre-adjusted and delivered ready to be mounted on a pipe with flexible Ø37mm sleeve on a 50cc 2T vespa.
Reference: 1610645
A MALOSSI carburettor kit pre-adjusted and delivered ready to be mounted on the Ø20mm intake pipe of your VESPA SPECIAL 50cc 2T.
Reference: 1610839
A MALOSSI carburettor kit with valves, pre-adjusted and delivered ready to be mounted on a pipe with flexible Ø37mm sleeve on SPECIAL 50cc 2T vespa.
Reference: 1610857
A MALOSSI carburettor kit pre-adjusted and delivered ready to be mounted on a pipe with flexible sleeve Ø28.6mm on vespa 50 and 125 2T.
Reference: 201.1905
A carburetor pre-set and delivered ready to be mounted on your original vespa 50 and 125 pipe.
Reference: 19622800
Carburetion kit provided for your VESPA scooter from 50 to 125cc!
Reference: 1610997
A superb carburetor kit very complete 21mm compete with high-end equipment!
Reference: 201.2103
A pre-adjusted carburetor delivered ready to be fitted to your original vespa 50 and 125 pipe.
Reference: 1610910
Specially designed and designed carburettor package for PIAGGIO APE 50cc with separate lubrication.
Reference: 201.2402
A flexible carburetor delivered ready to be mounted on a pipe with flexible sleeve Ø28.5mm on vespa 50 and 125 2T.
Reference: 1611040
A superb racing carburetor kit in 19mm very complete with high-end equipment!
Reference: 1610630
A MALOSSI carburettor kit pre-adjusted and delivered ready to be mounted on the Ø20mm intake pipe of your VESPA 50cc 2T.
A MALOSSI carburettor kit pre-adjusted and delivered ready to be mounted on a pipe with flexible sleeve Ø28.6mm on vespa 50 SPECIAL 2T.
