
Reference: 440922
ARTEIN pressed cardboard joint sheets 2 thicknesses (0.50 / 0.75mm)
A very good quality product, ideal for cutting your own joint.
Banner
Ideal for refurbishing your seal (ignition covers, transmission housings, oil, gearbox and other applications on the engine part…). Here is the tube of LOCTITE joint compound in metal gray color with excellent properties. Whether in terms of resistance, flexibility during installation or duration over time!
This is because it can withstand various oils, lubricants and coolants. Regarding its temperature resistance, its range is - 55 ° C to 250 ° C (continuous) and 250 ° C max at peak! The paste is not recommended for the parts in permanent contact with the fuel, it can be used in addition to an existing gasket pre-cut by hand to greatly improve the seal and the traditional gasket. Clearly, a high quality product (renowned brand) in terms of resistance and various applications.
Reference: 440922
A very good quality product, ideal for cutting your own joint.
Reference: VKM00040
Artein cutting joint sheets
Reference: 440923
ARTEIN self-cut seal sheets 0.15 0.25 and 0.50 mm.
Reference: 440924
Cutting sheets to cut yourself ARTEIN 0.8 and 1.2 mm, ideal for the manufacture of cylinder head or exhaust!
Reference: P300000999001
Pack of ATHENA Racing cutting edges with joint pipe.
Reference: 279134_cgn
A good quality paste that resists up to 180 ° C with a maximum drying time after 24 hours.
Reference: 1379570
Fast setting adhesive gel form, high resistance to adding material, filler metals / some plastics, rubber, wood, paper, leather ....
Reference: 3463
A material addition paste used by our team for great preparation. The quality is present. Practicality too!
Reference: 152110
Kit of four 150°C paper seal sheets, different thicknesses included.
Reference: 036.163
Elastic joint paste resistant to high temperatures. (300 ° C)
Reference: 152111
Ideal for creating your own engine gasket, carburetor and many other uses.
Reference: 317820
Ideal for safe and leak-free mounting of your exhaust.
Reference: 3450
A very well studied paste for filling or repairing your metal, aluminum, ceramic, wood and even plastic parts.
Reference: 152122
Kit of four reinforced fiber gasket sheets 250°C, different thicknesses included.
Reference: 5926
A high-end sealant for maximum resistance and sealing from -60° to + 250°.
Reference: 1133306
A top-of-the-range joint compound for maximum resistance and tightness. This paste resists from -55 ° to 250 ° C without problem.
A top-of-the-range joint compound for maximum strength and tightness. This paste resists from -55 ° to 250 ° C without problem.