Reference: 866
needle sleeve jointed CGN by INA pulley Ø22 X Ø16 X 14mm for Peugeot 103
A high-end socket, ultra reinforced and all at affordable price.
Banner
This DOPPLER pulley from the OPEN range consists of a plate entirely cut in the mass in a very high quality aluminum. Its silver anodized finish allows it to fight against oxidation.
The steel pinion, which is anti-corrosion treated, acts as a centering device in the chainring and is adjusted to reduce skipping phenomena.
The 5 screws make it possible not to have any shearing thanks to their countersunk heads which, of course, are conducive to fighting against loosening.
Composition :
- 1 Ø213mm aluminum plate, for belt with original width.
- 1 steel pinion (10 or 11 teeth)
- 2 sealed needle bearings HK1616-2RS.
- 5 FHC M5 x 15 screws.
Don't forget to select the number of teeth before adding to the basket!!
Assembly advice:
The countersunk head screws are to be tightened crosswise, to a torque of 4.5Nm.
Grease the needle roller bearings before fitting, then every 4500 kilometers if necessary, or every year.
Mounts on:
PEUGEOT 103 MVL (50cc)
PEUGEOT 103 SP (50cc)
PEUGEOT 103 VOGUE (50cc)
Reference: 866
A high-end socket, ultra reinforced and all at affordable price.
Reference: 4278
Ideal in case of breakage or wear for a change of good quality at low prices.
Reference: 210755
A piece that will give you a beautiful sporty and high-performance TUNING appearance.
Reference: 517368
Quality pulley for your MBK 51 moped!
Reference: 4269
Ideal for reassembly without play at a lower cost.
Reference: 288776
A pulley which will bring a very good improvement compared to the origin.
Reference: S715386
Ideal for winding without a game with a lower-cost quality product.
Reference: 499336
Ideal for starting fresh, mounts on ER2 DOPPLER pulley for all PEUGEOT 103 / MBK 51 models except SPX, RC X, MVX, CLIP.
Reference: 200338
A piece that will give you a beautiful sporty and high-performance TUNING appearance.
Reference: 491173
Clutch pulley ER86 with adjustable clutch without disassembly!
Reference: 715378
Reinforcement plate for your moped!
Reference: 511877
Excellent for not having play in your pulley / chainring. Attention limited quantity!
Reference: 503409
The replacement clutch housing of the DOPPLER ER2 clutch pulley.
Reference: 722706
The original clutch bell of your 103 SPX and RC X.
Reference: 8815
Ideal for reassembly without play with a quality product at a lower cost.
Reference: 054967
Excellent for having no play in your pulley / chainring. Attention limited quantity!