Déstockage Pièces Scooter, Moto & Mobylette en Promo à Prix Choc

Reference: 5114258

Variator MULTIVAR 2000 MALOSSI for maxi-scooter 350cc, 450cc BENELLI VELVET, QUADRO4, SUZUKI BURGMAN

One of the best known variators in the world of the 2 wheel compared to it's performance and its solidity.

Reference: 5113134

Variator MALOSSI MULTIVAR 2000 for maxi-scooter 125/150 / 180cc YAMAHA, MBK, MALAGUTI, ITALJET, BENELLI and other models

One of the most known variators in the world of the 2 wheel compared to it's performance and its solidity.

Reference: 27 7441.C0

Valves competition vulcanized VL10 MALOSSI carbon 0.30mm for minarelli vertical (booster rocket, bw's)

Competition dampers being part of the market range for higher motor scooter Minarelli Vertical.

Reference: 33 9775

Sticker MALOSSI black 16,6cm

Reference: 27 8118.K0

Set of 4 strips of valves MALOSSI karbonit for VL9 (HONDA, PEUGEOT ...) or VL12 (MINARELLI, NITRO ...)

Set of plates KARBONIT 0.30 and 0.35 mm for VL9 and VL12 MALOSSI.

Reference: 35 1981.40

Set of 2 Ø40 X 1.5mm segments for MALOSSI 50cc cast iron kit on vertical, horizontal minarelli scooter ...

Ideal for maintaining and repairing its 50cc MALOSSI cast iron kit in the event of loss of compression, heating, etc. Thickness 1.5 mm.

Reference: 35 5268

Set of 2 segments Ø43 / 43.4 or 43,8mm x 1,5mm thickness for kit MALOSSI Fonte 65cc on PIAGGIO CIAO

Ideal for back compression, cheaply.

Reference: 3216014

RX MALOSSI exhaust for Maxi-Scooter YAMAHA XENTER 125cc and 150cc ie 4T LC

The MALOSSI RX is a very high-end exhaust for demanding users, offer your YAMAHA 125cc and 150cc, look, performance, quality and weight loss!

Reference: 13 4930

Replacement bellows for MALOSSI PHBH Ø26mm carburetion kit

Ideal in case of wear of your old bellows.

Reference: 1418001B

Racing air filter for original air box W BOX FILTER MALOSSI maxi-scooter YAMAHA TMAX 530 from 2017

Air filter essential to improve the performance and filtration of your YAMAHA TMAX 530 from 2017.

Reference: 06 6208

pump seal water has MALOSSI

Water pump gasket MALOSSI for Peugeot 103 Mbk 51 and Piaggio ciao.

Reference: 6711160

Primary transmission Z15 / 43 extended for DERBI MALOSSI (ATLANTIS, PADDOCK, PREDATOR ...)

A gear reputed to be unbreakable and more will bring you an extra down on your scooter.

Reference: 20 5703

Pipe of admission MALOSSI MHR Ø30mm with collar, sleeve, air box bellows ... for motorcycle HONDA 75/80 MBX, MTX, NSR ...

An intake pipe fine study with high-quality materials for better gas arrived.

Reference: 1113208

Pack joint for kit MALOSSI MHR 47.6cc for Peugeot Ludix Blaster & Jet Force 50cc

A pack upscale joint, ideal for winding without leaking.

Reference: 11 2789

Pack gasket kit 70cc Ø47mm MALOSSI cast without head / original kit for minarelli vertical (booster rocket, bw's ...)

Ideal for reassembly without leakage with a quality seal.

Reference: 15 0331

MALOSSI Y connection for hose Ø6 / 8/10 / 13mm of your choice

MALOSSI Y connection diam 6 to 13. Ideal for adding a recovery lung or other.

Reference: 6117086

MALOSSI X Kevlar Belt belt for Peugeot (buxy, speedfight, ...)

A very strong belt that does not lose grip.

Reference: 15 0323

MALOSSI T-fitting for hose Ø6 or 8mm of your choice

MALOSSI T fitting diam. Of your choice. Ideal for adding a recovery lung or other.

Reference: 1610630

MALOSSI SHBC 19 carburettor kit with air filter and special cable for VESPA PK HP and XL 50

A MALOSSI carburettor kit pre-adjusted and delivered ready to be mounted on the Ø20mm intake pipe of your VESPA 50cc 2T.

Reference: 3214796

MALOSSI RX exhaust for maxi scooter HONDA DYLAN, PS, SH, KEEWAY OUTLOOK ... 125cc, 150cc ...

The MALOSSI RX is a very high-end exhaust for demanding users, offer your maxi 125cc scooter the look, performance, quality and weight loss!

Reference: 2915602

MALOSSI reinforced clutch spring for Yamaha T-Max 530 from 2012 and KYMCO AK 550 from 2017

Three MALOSSI clutch spring sets for the original clutch of your maxi sccoter KYMCO AK 550 ie 4T LC euro 4 2017 and YAMAHA T MAX 530 from 2012.

Reference: 0313383

MALOSSI RED CHILLI oil filter for maxi-scooter APRILIA ATLANTIC, GILERA NEXUS, PEUGEOT GEOPOLIS, PIAGGIO MP3 ...

Racing oil filter for excellent engine filtration!

Reference: 27 4459

MALOSSI pressure relief valve for BIG DEPS aluminum cylinder head on PIAGGIO CIAO, BRAVO, BOSS, GRILLO, SI ...

A valve smaller than the original provided for the BIG DEPS 70cc Ø47mm kit.

Reference: 61 3548B

MALOSSI PIAGGIO CIAO transmission pulley without variator diameters 65, 70, 80mm

A high quality pulley to increase its top speed with diameters of your choice!

Reference: 1610857

MALOSSI PHBL 24 carburetor kit with air filter and special cable for VESPA ETS, PK, XL, HP ... 50 and 125

A MALOSSI carburettor kit pre-adjusted and delivered ready to be mounted on a pipe with flexible sleeve Ø28.6mm on vespa 50 and 125 2T.

Reference: 3216691

MALOSSI FLIP exhaust for horizontal minarelli scooter (nitro, aerox, ovetto, neos, ...)

A small high quality pot with the coolest aluminum silencer. Ideal to accompany an original configuration or small 50cc kit.

Reference: 13 4929B

MALOSSI flexible sleeve pipe connection / DELLORTO carburetor, PWK, KEIHIN, OKO, FURYTECH, YSN, POLINI ... fixing Ø35 / 35mm

Flexible upscale sleeve Ø35mm fixing each side! Special carburetor and big thrust configuration!

Reference: 1414532

MALOSSI DOUBLE RED SPONGE air filter foam for the original maxi-scooter airbox APRILIA, DERBI, PIAGGIO, VESPA ...

An ideal competition filtration foam for the preparation of your original air box, double layer version.

Reference: 66 7861B

MALOSSI crankshaft connecting rod cage Ø16x22x12mm

MALOSSI Ø16mm connecting rod cage ideal for refurbishing your crankshaft.

Reference: 20 5461

MALOSSI admission kit (pipe + valves) special PHBL Ø20 to 25mm on VESPA PK, XL, ETS, FL2, HP ... 50 and 125

The best way to mount a large PHBL carburetor on your VESPA ETS and PK 50 or 125cc and increase your performance!