Malossi SpA is pleased to make available to its customers a new series of primary transmission gears for 50cc scooters.
These new gears are the result of 20 years of experience Malossi in the design and manufacture of gears for scooters racing and road. The new gears H. t. Q. have been studied and built with straight teeth to minimize losses through friction and stress on the supports. Moreover, our gears slightly lengthen the reports, allowing to use the power of your scooter and to guarantee a considerable sprint compared to your original scooter. The transmission is extremely important in a good preparation, if your drive and torque control are at their maximum, your minute level engine revolutions and also that the top speed does not sufficed you! Just change your transmission to operate your bottom to top speed obviously losing some can of acceleration, it will also enable the settings, a different couple, it will accompany the new settings Inverter / spring spurt. We recommend the racing with a housing mounted on bearings and good transmission oil. The primary drive is the one on which the clutch housing is fixed, there are also secondary transmission. The transmission MALOSSI MHR is a real competition of racing room, they have the reputation of being indestructible! Take advantage. Before purchase, we recommend you to observe your primary and secondary transmission to know its teeth and thus judge on which to take. We advocate an area of 100km and running an oil change after 1000/1300 km.
Please note, this transmission teeth are larger than the origin thus the ratio is thereby completely changed despite counting teeth!
Itself on:
CAGIVA PROGRESS 50 2T
DERBI ATLANTIS 50 2T <-2002
DERBI ATLANTIS 50 2T LC
DERBI HUNTER 50 2T
DERBI PADDOCK 50 2t
DERBI PADDOCK 50 2T LC
DERBI PREDATOR 50 2T
DERBI PREDATOR 50 2T LC
.png)
.png)
