Reference: 512119
DOPPLER VORTEX carburetor intake pipe Ø24 to 28mm (with Ø24mm reducer) mécaboite DERBI and AM6 engine
A very well designed intake pipe, ideal to accompany a high engine configuration.
Banner
Here is the admission pipe POLINI Oriental evolution for MINARELLI AM6 engine mecaboite! She also climbs on some DERBI if desired, and on specific engines like PEUGEOT 103 SPX with carters MALOSSI, MBK 51 with EUROCILINDRO carters or with carters POLINI and adaptor RRD.
This pipe is really on top, first of all you guide it as you wish to place the carburettor as you want! Its position and internal diameter are provided for carburzers of 23 to 24mm as MIKUNI TM24 and POLINI CP. Its fixation diameter is Ø27 to 28mm. To avoid harmful vibrations and cuts, the sleeve is in a specific glass.
Hard enough for the pipe to crack and not break during the clamping. Even on the aesthetic side you feel that POLINI really treated this room to the maximum. Needless to put a joint, a joint is pre-integrated to the junction, plus it is delivered with notice, visserie.. Clearly, thanks to perfect diffusion, vibration absorption, good position.. The performance gain will be well present and felt!
-For carburettor MIKUNI TM24
-For carburetors POLINI CP 23 and CP 24 and CP EVOLUTION
-Fixing of carburettor Ø27 to 28mm.
-Internal diameter 25mm.
-tilt angle 43° and length 68mm
-Orientable 360°
A= Ø25mm
B= 21
C= 43°
Mounting on:
APRILIA: AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 MINARELLI AM6 - RX 50 MINARELLI AM6 - TUONO 50 Minarelli AM6
MINARELLI: AM3 - AM4 - AM5 - AM6
SALE: BAJA 50 Minarelli AM6 Euro4/5 - DERAPAGE 50 Minarelli AM6 Euro4/5
FANTIC MOTOR: CABALLERO 05 Minarelli AM6
HM: CRE 50 SIX 2003/2005 Minarelli AM6 - DERAPAGE 50 2001/02 Minarelli AM6 - DERAPAGE 50 2003/05 Minarelli AM6
MALAGUTI: DRAKON 50 - XSM 50 Minarelli AM6 - XTM 50 Minarelli AM6
YAMAHADT 50 R MINARELLI AM6 - DT 50 SM MINARELLI AM6 - TZR 50 MINARELLI AM6
SHERCO: HRD ENDURO MINARELLI AM6 - HRD SM MINARELLI AM6
RIEJU: MRT, MRX MINARELLI AM6 - SMX MINARELLI AM6 - SPIKE MINARELLI 2006
BETA: RR 50 AM6 (1999-2002) - RR 50 ENDURO, MOTARD 50 ALU AM6 2003 - RR 50 SM AM6 (2002-2004)
MBK: X-LIMIT 50 Minarelli AM6 - X-POWER 50 Minarelli AM6
PEUGEOT: XPS 50 SM MINARELLI AM6 - XPS 50 T MINARELLI AM6 - XR6 50 MINARELLI AM6
Reference: 512119
A very well designed intake pipe, ideal to accompany a high engine configuration.
Reference: 53405.05
Pipe of admission ideal to accompany a carburetor 17.5mm to 21mm!
Reference: LC.44.400
The must of the admission kits for large configuration with carburetor in 28 to 35mm. Reserved for connoisseurs! Hyper short, super diffusion, carburetor up to 35mm, vibration scrub ... Simply the best.
Reference: 215.0462
For an improved admission and a good performance gain! Orientable 360° with tilt angle at 43° more pronounced than normal!
Reference: 590
A pipe that will increase performance while spending little.
Reference: CL01
A competition model that will allow you to greatly improve the performance of your AM6.
Reference: 1773
A quality 360 ° swivel pipe to replace the old one Supplied with two 30 and 45 ° sleeves!
Reference: 9929240
Replacement for TPR orientable intake pipes with MIKUNI TM 24 and OKO 28 carburettor on mécaboite Minarelli AM6 and DERBI.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 467798
A good quality pipe with a near perfect finish for an affordable price.
Reference: 9906940
Ideal to accompany the carburetors 19 to 21mm on your mécaboite minarelli am6.
Reference: 269801
A pipe that will gain in performance while spending little.
Reference: 075805
An intake pipe very well designed, ideal to accompany a push engine configuration.
Reference: 25526
A quality aluminum pipe to replace the old one.
Reference: TUB-04
Special intake pipe for large diameter carburetors from 26 to 28mm like OKO ... 360 ° swiveling and ideal for large configurations.
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.