Banner
Quality CP POLINI 21mm carburettor, rigid mounting ideal for well-prepared engines!
POLINI CP carburettors are real performance elements reviewed and corrected by the Italian brand. Whether in the finish, the materials used and the grafted accessories has this pretty quality piece. Smooth and burr-free, the machining is precise and will obviously optimize the performance of your engine. Its body is like all POLINI carburettors, in light aluminum alloy, engraved with the name of the brand.
Delivered as presented, this carburetor is equipped with a lever choke that you can switch to cable if you wish.
It has a socket for separate lubrication, its fixing diameter at the inlet is Ø24mm. We sell and offer all the spare accessories available for POLINI carburettors, ideal for modifying and fine-tuning your settings.
Technical characteristics:
-21mm carburettor, rigid mounting.
-Diameter of fixing to the admission: Ø24mm
-Main jet 72
-Secondary nozzle 42
-Needle 14/22
-Bulk 24mm, cut 30 °.
-Nozzle 2.7.
-Starter lever, pull tab
-For Ø46mm air filter
Reference: 370.0000
Very practical to have the most precise settings possible on your PWK, POLINI CP, KEHIN, FURYTECH, OKO carburettors ...
Reference: 343.0017
Ideal in case of fuel leakage on your PWK carburetor.
Reference: 343.0009
The gray racing version of the tank for CP POLINI carburettors.
Reference: 343.0011
Ideal for a refurbishment or in case of leak on your carburetor CP POLINI!
Reference: 343.0012
Ideal in case of breakage, loss, wear, the tank cap and its POLINI cap for your CP carbs!
Reference: 343.0013
Ideal in case of leak, for a refurbishment of your carbide POLINI CP with tank cap!
Reference: 343.0015
Ideal in case of loss, breakage ... The replacement cup for your carburettors POLINI CP.
Reference: 343.0700
Ideal in case of loss, breakage on your carburettor POLINI CP.
Reference: 343.0014
Ideal in case of wear, leakage or breakage in your carburetor Polini CP.
Reference: 343.0800
All sizes available, ideal for refurbishing or adjusting your POLINI CP carburettor.
Reference: 343.0400
The best to adjust or repair your POLINI CP carburetor!
Reference: 343.0016
Ideal to repair a worn carburetor, broken ... Delivered complete!
Reference: 343.0600
Ideal for adjusting your POLINI CP carburettors, or changing a worn needle!
Reference: 343.0004
Ideal for refurbishing your POLINI CP carburetor.
Reference: 343.0002
Ideal to refurbish your carburetor POLINI CP.
Reference: 343.0001
Ideal for refurbishing your POLINI CP carburetor.
Reference: 343.0019
A cable choke kit that mounts on all POLINI CP or PWK carburettors regardless of the brand !!!
Reference: 343.0338
Ideal for adjusting your POLINI CP carburettors!
Reference: 343.0022
The 90 ° tube kit, ideal in case of breakage or to change your straight assembly on your POLINI CP, PWK carburettors ...
Reference: 2633
The rigid version and choke lever 21mm DELLORTO PHBG!
Reference: 467792
It's a good copy sold complete and cheaper!
Reference: 2599
The rigid and cable choke version of the 21mm DELLORTO PHBG! Idle and richness screw on the left of the machine!
Reference: 2912
The ultimate and ultra racing version of the 21 PHBG, of much better quality with parameters revised upwards, Red Edition model!
Reference: 2671
The BS 2 version of DELLORTO PHBG Genuine high quality dellorto in Ø21mm.
Reference: 2696
The racing version of the 21 PHBG, of much better quality with parameters revised upwards, model Black Edition!
Reference: 72 7114
PHBG 21 BD by malossi carburetor, a real performance piece.
Reference: 2557
The rigid and choke version with lever of the 21mm DELLORTO PHBG! Idle speed and richness screw on the left of the machine!
Reference: 201.2104
A real asset for a well-prepared engine configuration! A top-of-the-range piece 100% Made in Italy! CP EVOLUTION 21 model with lever choke, without separate lubrication or vacuum, flexible mounting ...
Reference: 201.2101
A high-quality carburetor at a good price, with sockets for separate lubrication and depression! Choice of cable or lever!
Reference: 141376
It is a good copy sold complete and cheaper!
Reference: 2509
Genuine high quality dellorto in Ø20mm.
Reference: 2590
The rigid and choke version with lever of the 21mm DELLORTO PHBG! Idle speed and speed screw to the right of the machine!
Reference: 517453
Replacement carburettor TUN'R 'R type PHBG BT for your motorcycle, scooter ...
Reference: 733
A KEHIN copy with POWER JET at a low price, a real saving.
Reference: 525523
The rigid version and choke lever of the 21mm TUN'R PHBG! Idle and richness screw on the left of the machine!
Quality CP POLINI 21mm carburettor, rigid mounting ideal for well-prepared engines!
