Reference: VE.01.125
ITALKIT pneumatic exhaust valve for ROTAX 122, 123, APRILIA RS 125cc 2T, KARTING ...
No more valve problems! Pneumatic system valve, high performance and reliability for your ROTAX 122 and 123!
Banner
Fits with the original cylinder head. Unauthorized cylinder not respecting the 125cc displacement.
Here the cylinder / piston kit 140cc full of great brand ITALKIT Competition for ROTAX engine 125cc 2 Time 123, Aprilia RS, AF1, EUROPA, Pegaso ... and other models. This kit is more like the original, ITALKIT has fully optimized the cylinder to provide a real power gain compared to the original while maintaining excellent strength and reliability engine, a diameter of 57mm for the piston VERTEX is a displacement increased to 140cc.
The cylinder is an aluminum model with an architecture and well designed channels. With specific admission transfers really well drawn and a large exhaust valve, of oval / extended form. The valve exhaust system is identical to the original, the valve is not supplied with this cylinder, it you will therefore resume the original part.
The aluminum alloys used are excellent and will ensure reliability and better durability of your engine you will understand, providing a perfect fit, clean and free of burrs. This cylinder comes with a brand piston VERTEX upscale with specific heat treatment. With treatment, forms and composition, this piston was very well designed and studied in order to offer a better thermal expansion, agreeing at the same time perfectly with this cylinder to support the free times, brutal regime change and prolonged use.
Obviously delivered complete as presented (photo noncontractual), you will be as surprised as we have been on this equipment which guarantee extreme reliability and performance obviously to appointments.
We recommend at least: a relaxing escape, a carburetion at the very least 30mm (flat bushel fit perfectly), original cylinder head. If your engine is prepared, or old, we recommend changing the crankshaft, by the way do not hesitate to ask a rod kit strengthened. A set of rigid carbon flaps slats will also be welcome to exploit the good plans.
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Reference: VE.01.125
No more valve problems! Pneumatic system valve, high performance and reliability for your ROTAX 122 and 123!
Reference: 63160.00
Set of two cylinders right and left for RUMI 125cc 2T era! Delivered with their cylinder heads high compressions.
Reference: 63100.00
Kit right without cylinder head for your old RUMI Bi-cylinder 2T!
Reference: CIL-1041-S
Very good quality kit at a very low price for your YS 125 2T from 2005 to 2018!
Reference: P400250100001
Kit 125 ATHENA, ideal to start anew with a good performance gain!
Reference: 63110.00
Kit left complete without cylinder head for your old RUMI Bi-cylinder 2T!
Reference: CK.01.125.G
A solution to literally optimize the performance of your 125cc 2-stroke rotax 122 motor bike! The ITALKIT Sport version, high-end aluminum cylinder + cylinder head, piston diameter 54mm two-segment with studied intake transfers and valve exhaust. .
Reference: P400250100011
The famous BIG BORE 144cc of ATHENA for KAWASAKI KW 125 2T from 2003 to 2007! Monstrous!
Reference: CIL-1036-S
The 125cc BARIKIT kit with WOSSNER piston for ROTAX 122 engine.
Reference: 146.0700
The famous POLINI kit for ROTAX 127 that equips the APRILIA AF1, TUAREG, RED ROSE, AF1, FUTURA, CLASSIC ...
Reference: 060200
One of the biggest market kit for Honda MTX R2H 125 and NS 125 F.
Reference: 107.0028
A real bully, the 165cc kit for your 125cc 2-stroke CAGIVA MITO, PLANET, RAPTOR ... With exhaust valve!
Reference: P400485100003
The famous athena 125cc kit from ATHENA for Yamaha YZ 125 motorcycles from 1997 to 2004
Reference: CK.01.140.G2
140cc optimized version for your 125cc 2-stroke rotax 122 motor bike! High-end aluminum cylinder, two-segment piston diameter 57mm with upwardly revised intake transfers, large diameter valve exhaust ... cylinder head!
Reference: P400485100029
The famous BIG BORE 144cc from ATHENA for Yamaha YZ 125cc motorcycles from 1997 to 2004.
Reference: 107.0020
Ideal for giving performance to your old 125cc CAGIVA by refurbishing it!
Reference: CI.01.125.G
A unique solution to literally optimize the performance of your motorcycle 125cc rotax 122 2-stroke engine! The ITALKIT Sport version, high-end aluminum cylinder, piston diameter 54mm two-segment with studied intake transfers and valve exhaust ...