Reference: CUL-995
Yoke complete pad Ø47mm for kit 70cc BARIKIT aluminum pad on scooter minarelli horizontal liquid (nitro, aerox ...)
The ideal replacement cylinder head if cracked, sheer ...
Banner
Not approved on the public highway, only for competition on the track, run .... Respects by no means the rules of the road!
Here the Ø47mm aluminum cylinder largest Spanish manufacturer BARIKIT, this version is the most powerful version below the factory prepared series of BRK series (BRK BARIKIT RACING). The finishing cylinder is very clean and the treatment nykasil good quality! Admission level BARIKIT remained simple with a 5 transfers like the MHR Team and many other cylinders, lateral transfers before are designed to go under the exhaust, the base is also well worked to deliver performance and better scanning . The exhaust is a very wide array model. The diagrams are very high, to speak this kit so we recommend a good carb and good racing exhaust with large volumes. This racing version is therefore equipped with the famous decomposable cylinder head (con culatin / stud bolt), the head offers better cooling and thus obviously additional performance, the pad is a template for entering preserve centered combustion chamber. The combustion chamber is a high compression truncated version we regret finish this level not high enough, no polishing room, enough low-end aluminum. Apart from this, BARIKIT being one of the largest piston manufacturer, quality is present, the piston mono segment is also very good work and excellent quality to ensure high speeds. We regret the absence of a preparation on the rear piston to optimize the sweep. In conclusion, this is a very good kit, excellent quality / price, performance is well above appointment has high speed is the maximum power that is not referred the couple. We appreciate that the kit is supplied with 4 joints of base plate to make the squish.
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. An improvement of the piston skirt and stockings is also included in this change. Allow a little extra time for this preparation!
Itself on:
Engine 2 Time minarelli horizontal liquid scooter
Engine 2 scooter minarelli horizontal air Time Spent liquid (long only)
APRILIA AREA 51 LC
APRILIA GULLIVER 50
NETSCAPER APRILIA SR 50 LC
APRILIA RALLY 50 LC
RACING APRILIA SR 50 LC
APRILIA SONIC LC
APRILIA SR REPLICA LC
APRILIA SR STEALTH
BENELLI 491 SPORT LC
BENELLI K2 50 LC
BETA ARK 50 LC
BETA EIKON 50 LC
GARELLI GSP 50 LC
ITALJET DREAGSTER 50 LC
MALAGUTI F15 FIREFOX 50 LC
MALAGUTI F12 DIGIT KAT LC
MALAGUTI F12 Phatom LC
MALAGUTI F12 R LC
MBK MACH G 50 LC
MBK NITRO 50 LC
YAMAHA AEROX 50 LC
YAMAHA JogRR 50 LC
Reference: CUL-995
The ideal replacement cylinder head if cracked, sheer ...
Reference: EQ-707
A perfect kit to ride every day and over long distances without being afraid of heating or primer.
Reference: P400485100043
Must of all the kits ATHENA with a stud bolt for better gas explosion and a better engine cooling.
Reference: 31 8430
A very good compromise between strength and power!
Reference: 3115390
Replacing the famous MALOSSI MHR TEAM!
Reference: 31 8459
For more performance and a solid engine! This 70cc kit will be very good for equipping your scooter with a low horizontal Minarelli / Yamaha engine.
Reference: 3112642
A high-performance ultra complete engine thanks to its increased displacement and 7 large intake transfers.
Reference: 166.0113/10
Very high-end kit! The EVOLUTION 3 is one of the best!
Reference: 166.0110
The excellent BIG evo for crankshaft normal stroke 39.2mm with long rod 85mm.
Reference: 9931310
A kit that offers very good torque, good speed but also a lot of strength! In addition to this, you need to know more about it.
Reference: 166.0083/R
Very efficient and solid, the famous POLINI CORSA hand retouched at POLINI!
Reference: 3113262
A very good compromise between strength and power!
Reference: 081100
A kit with even further diagrams for a bigger performance boost on your scooter liquid.
Reference: 010735476
An ultra high motor racing, high performance while it has reasonable price.
Reference: 3112642.T0
Kit MALOSSI MHR TEAM 2 Factory Ø47.6mm axis Ø13mm for minarelli horizontal liquid (nitro, aerox, ...)
Reference: 01073450
A high ultra racing engine, very powerful all this at a price never seen for such quality.
Reference: 31 8460
For more performance and a strong engine! This 70cc will be very good to equip your scooter with low Minarelli / Yamaha engine horizontal.