Banner
A strong and powerful 50cc high engine. High quality and approved for daily use.
This 50cc cylinder head piston cylinder kit is homologated on the road only insofar as the machine (moped) on which it is fitted remains 100% original with the original flange on the exhaust, ignition... obviously respects more French legislation which is 45km / h maximum.
The CARENZI EVOLUTION black 50cc kit, it is very close to the original. Its hemispherical high compression cylinder head makes it a more efficient kit than the original. It is road approved, even French road. We appreciated its piston with a chrome segment and its finish worthy of high-end cast iron! Its very well calculated compression ratio makes it quite efficient despite not much higher diagrams than the original. Its exhaust is slightly more worked too. Its displacement is 49.7cc (Ø40.3mm for 39mm stroke). This is the strongest 50cc kit on the market!! With such a price, good performance, increased solidity and French approval, it is really perfect.
We recommend at least to accompany this kit : carburetion settings, expansion pot. (the cylinder head must be tightened to 1.6 ÷ 1.8 kgm)
The pack contains :
-Piston
-2 clips
-2 segment including a chrome
-Notice
- Cylinder head bleed screw
-Complete seal pack
-1 high compression cylinder head
As an option we offer you a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement of the piston and the lower skirts is also included in this modification. Count a little extra time for this preparation!
Mounts on 50cc motorcycles with gearbox equipped with the minarelli am3, am4, am5, am6 euro 1, am6 euro 2 engine :
APRILIA RS 50cc am6 engine from 1997 to 2006 (warning news after 2006 in derbi euro 3 engine)
APRILIA RX am6 engine (warning news after 2006 in derbi euro 3 engine)
APRILIA MX am6 engine (warning news after 2006 in derbi euro 3 engine)
APRILIA TUONO 50cc am6 engine from 1997 to 2006 (warning news after 2006 in derbi euro 3 engine)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHE RC O SM
SHE RC O EN DURO
SHE RC O HRD
SHE RC O EN DURO
And many other machines!
Specific References
Reference: 01300940
A great small kit 50cc aluminum with exhaust with bar, top to increase performance while remaining in the statutory and displacement in an accessible price on your ICC and other types am6!
Reference: 3112199
A 50cc kit very powerful and solid, ideal for driving every day with reinforced crankshaft, 21mm carburetion, racing exhaust ...
Reference: 011332403
The luxury version of the AIRSAL 50cc in two-segment, a powerful, solid, torquey kit and above all with an attractive price, very good basis for engine preparation.
Reference: EQ-922-S
High complete engine ideal for respecting the 50cc displacement and circulating every day with an efficient kit 5 transfers, bar exhaust, high compression cylinder head with incoming stud, mono segment piston ...
Reference: 013006476
The deluxe version of 50cc AIRSAL bi-segment, a powerful kit, strong, torquey and especially with an attractive price, very good engine preparation base.
Reference: CIL-788
Cylinder / piston without cylinder head ideal for meeting the 50cc engine and circulate daily. 7 transfers, extended oval exhaust, dual piston segments .... To accompany a cylinder head high compression BARIKIT.
Reference: 133.1011
A very good high engine which brings a very good performance gain while preserving the solidity and the legal displacement of 50cc.
Reference: H011381403
A kit a bit more powerful than the original while maintaining excellent reliability for a completely ridiculous price.
Reference: 480587
An excellent 50cc kit which will bring you performance and reliability! Surely one of the best value for money on the market.
Reference: 220399
Here is a high quality good motor much cheaper than the origin which offers better heat dissipation, less friction ...
Reference: 53407.00
A cheap kit, reliable and efficient transfers with 7 admisison!
Reference: 482036
The 50cc kit type origin the cheapest on the market with a quality and a correct finish.
Reference: 031000G
A small kit at a low price, nice, solid and efficient.
Reference: 11000042
A powerful kit to install with a crankcase alignment and a good configuration low engine, exhaust and carburetion!
Reference: CK.44.492.G2
A very powerful kit with a specific admission has 6 lateral transfers and a stud bolt! Performance level! To put with the POLINI and MALOSSI!
Reference: 478325
Ideal for refurbishing your high CPI engine.
A strong and powerful 50cc high engine. High quality and approved for daily use.
