
Reference: 329906
Pack seal TEKNIX high engine type original cast iron on minarelli am6
A complete seal of good quality at low price, ideal for a winding without leakage.
Banner
Ideal to start on new, here is the small kit 50cc type origin of the house TEKNIX, this cylinder with its cylinder head will be installed with your engine minarelli am6. It is of good quality and the finish is really nice for the price, at the same time the house TEKNIX has nothing more to prove quality level on the material low price!
This high engine will not bring more performance than an origin but it offers you solidity, new equipment, for a really attractive price! Remember that aluminum offers better heat dissipation, but also better expansion, less friction ... than a cast iron cylinder.
The pack contains:
-Cylinder
-Piston bi-segments
-Cylinder head
-Segments
-Axle of piston
-Clips
-Pack attached
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Mounts on motorcycles 50cc has gearbox equipped with minarelli am3, am4, am5, am6 euro 1, am6 euro 2 :
APRILIA RS 50cc engine am6 from 1997 to 2006 (attention news after 2006 in derbi euro 3 engine)
APRILIA RX engine am6 (attention news after 2006 in derbi euro 3 engine)
APRILIA MX engine am6 (attention news after 2006 in derbi engine euro 3)
APRILIA TUONO 50cc engine am6 from 1997 to 2006 (attention news after 2006 in derbi engine euro 3)
BETA RR
BETA RR ALU
BETA CRE
HONDA HM
HONDA CRE
HONDA BAJA
HUSQUVARNA WXE
HUSQUVARNA CH
HM DERAPAGE
HM CRE
MALAGUTI DRAKON
MALAGUTI XTM
MALAGUTI XSM
FANTIC CABALLERO
PEUGEOT XP6
PEUGEOT XPS
MOTORHISPANIA RYZ
PEUGEOT XPS
PEUGEOT XP STREET
PEUGEOT XP STREET EVO
PEUGEOT XR6
MOTORHISPANIA RX
PEUGEOT XR7
MOTORHISPANIA RX-R
RIAJU RS1
RIEJU RS2
RIEJU RS2 MATRIX
RIEJU RS2 MATRIX PRO
RIEJU SMX
RIEJU MRX
RIEJU SPIKE
KEEWAY TX EN
YAMAHA DT
MBK X-LIMIT
YAMAHA TZR
MBK X-POWER
SHERCO SM
SHERCO ENDURO
SHERCO HRD
SHERCO ENDURO
And many other machines!
Reference: 329906
A complete seal of good quality at low price, ideal for a winding without leakage.
Reference: 455107
A set of good quality segments, ideal for refurbishment of your high engine.
Reference: 459087
A good quality piston that will allow you to put your original engine or kit 50cc nine for less.
Reference: 013006476
The deluxe version of 50cc AIRSAL bi-segment, a powerful kit, strong, torquey and especially with an attractive price, very good engine preparation base.
Reference: 3112381
A high-performance kit reserved for competition in 50cc, diagrams very worked with a very studied architecture!
Reference: 491302
A very good high engine which brings a very good performance gain while preserving the solidity and the legal displacement of 50cc.
Reference: P400130100004
A kit that allows you to have torque at all speeds.
Reference: EQ-922-S
High complete engine ideal for respecting the 50cc displacement and circulating every day with an efficient kit 5 transfers, bar exhaust, high compression cylinder head with incoming stud, mono segment piston ...
Reference: 220399
Here is a high quality good motor much cheaper than the origin which offers better heat dissipation, less friction ...
Reference: 478325
Ideal for refurbishing your high CPI engine.
Reference: 317341
Good quality at a good price, a high engine ideal to maintain an original configuration.
Reference: IM1
New range of MVT cylinders for your MINARELLI AM6 engine!
Reference: 9934500
High performance kit for AM6 engine!
Reference: 0113102403
Complete top engine ideal for respecting the 50cc cylinder capacity and driving every day with a high-performance kit.5 transfers, booster exhaust, high compression cylinder head with incoming stud, single-segment piston...
Reference: 11000168
An excellent 50cc kit, very powerful and very robust, ideal for competition as for the road!
Reference: 01300940
A great small kit 50cc aluminum with exhaust with bar, top to increase performance while remaining in the statutory and displacement in an accessible price on your ICC and other types am6!
Reference: H011381403
A kit a bit more powerful than the original while maintaining excellent reliability for a completely ridiculous price.
Reference: P400130100006
A powerful and very solid kit, the ATHENA is a great companion to ride every day, a high quality engine based high speed.
Reference: 011313403
The AIRSAL 50cc SPORT is ideal for riding every day, a performance gain is made for a great price on your am6 engines.