Banner
A very well studied kit, touch up by hand to have as much performance as aluminum kits while enhancing the solidity of a cast iron kit.
A very large kit very famous for having a very high power while being extremely resistant.
The CORSA polini or race in French is a d.47mm kit in cast iron retouched by hand with very advanced diagrams. It retains a normal exhaust as well as a twin segment piston which allows it a lot of torque and robustness.
It will reach powers of a majority of stock aluminum kit (not retouched). It comes with a carburetor adjustment nozzle, a cold racing candle, carbon racing valves studied in the kit.
Its piston is reinforced and worked with the kit, its cylinder head is polished frustoconical really well calculated which allows it a very good power by adding a good squish. The cylinder which remains in 5 transfers but has a revised and corrected admission and everything is in the diagrams retouched by hand!
We will also appreciate the reinforced O-ring seal which avoids many worries well known on this type of engine: the flat aluminum seals that break. Noted the finish of the lateral transfers which leaves something to be desired.
We recommend it with at least: reinforced crankshaft, 21mm carburetor and adjustments, reinforced bearings, racing exhaust.
CORSA POLINI 70 pack containing:
bi segment piston d.47mm POLINI
2 reinforced segments d.47mm X1
piston pin
POLINI reinforced needle cage
POLINI stickers
very complete POLINI notice
guaranteed POLINI
cylinder studs for exhaust mounting
CHAMPION cold racing candle
1 nozzle
X2 piston clips (rod rings) crab type
parck full joint reinforced POLINI
polished tapered racing cylinder head d.47mm POLINI
racing carbon 0.35mm POLINI valves
cast iron cylinder hand retouched 5 transfers POLINI CORSA
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust light by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement in the piston and bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Mounts on Peugeot 50cc vertical 2-stroke air scooter:
-BUXY
-ELYSEO
-SPEEDAKE
-SEEDFIGHT 2 AC
-SPEEDFIGHT AC
-SQUAB
-TREKKER
-TKR
-VIVACITY
-ZENITH
And other models ...
Specific References
Reference: 206.0200
Spare standard segment ideal for maintenance or in case of loss of compression.
Reference: 280.0012
High quality POLINI needle cage, ideal on 70cc kit and more !!
Reference: 272.0001
The pistol type POLINI piston clips for your axis of 12mm, material diameter of 1mm!
Reference: 206.0201
Chrome replacement segment ideal for maintenance or in case of loss of compression.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 271.0002
Replacement 12mm piston pin for kits Ø46 to 47,6mm on PIAGGIO, HONDA, KYMCO, CIAO ...
Reference: 213.0534
Ideal for tuning your carburation to the performance of your cylinder!
Reference: 209.0383
Indispensable for leak-free reassembly and optimal compression!
Reference: 252.0003
The replacement POLINI pot seal for your Peugeot scooter, essential in case of exhaust leakage at the cylinder.
Reference: 204.0680
Spare piston for POLINI cast iron kit in 47mm diameter.
Reference: 010224476
Escapement barrete, piston mono-segment, 47.6mm in diameter! A good little monster power!
Reference: 02041946
Powerful and strong, this 70cc is an excellent quality / price / power!
Reference: CIL-705
Ideal together to improve performance, all at a lower cost!
Reference: 020224476
Ideal in case of breakage, heating or motor clamp to a less expensive change. If you already have a cylinder head 47,6mm.
Reference: 02022046
Ideal in case of breakage, heating or motor clamp to a less expensive change.
Reference: CIL-730
A good kit without cylinder head, ideal to refurbish your engine with more performance!
Reference: 31 7133
A solid, reliable and high torque engine!
Reference: 010241476
This kit will offer more torque while keeping good reliability at a reasonable price.
Reference: 02042848
Cylinder piston with segments for scooter HONDDA VISION 80cc.
Reference: KT00058
A high engine without strong and powerful 70cc cylinder head, ideal for increasing your performance.
Reference: 9908660
A 100% complete, efficient and reliable 70cc cast iron kit for scooter PEUGEOT Vivacity, Trekker, Speedfight, ....
Reference: 01022046
5 transfers exhaust with oval, bi-segment piston and cylinder head high compression 46mm in diameter, a good kit torquey and very strong!
Reference: 31 7132
A kit to mount the cylinder head of origin, performance and durability with low price!
Reference: CI.26.651.G
The only aluminum kit and the most powerful kit available for this engine architecture!
Reference: 31 8640
A kit certainly a little less powerful than a team but which can surprise more than one.
Reference: 30425.M
A cylinder head without strong and torquey 70cc, ideal to optimize your performance. Equipped with 5 transfers, aluminum material with large exhaust and VERTEX piston mono segment.
A very well studied kit, touch up by hand to have as much performance as aluminum kits while enhancing the solidity of a cast iron kit.
