Reference: 440176
Set of 2 slats of valves DOPPLER fiber 0.32mm scooter PIAGGIO TYPHOON, NRG,
High quality slats, ideal to increase your performance on PIAGGIO scooter engine.
Banner
Here is a high-performance piece for VESPA PK, XL, ETS ... 125 2T This kit lets you pass on a true system with high performance valves, it offers a maximum gain of torque and power at all speeds! Very short, it comes with a pipe swivel sleeve viton to erase all the vibrations harmful to carburation. It will be necessary for you to cut parts to instal it correctly, the fixation is with 2 screws! This kit is to accompany a carburettor Ø24 to 30mm. The kit is delivered complete with check valves, carbon slats, machined adapter plate mass, swivel pipe with viton sleeve, collar for carburetor, instructions ...
Reference: 440176
High quality slats, ideal to increase your performance on PIAGGIO scooter engine.
Reference: 215.0115
Inlet kit with single-flap valves! Gain of torque and very high power in relation to a mounting without valves.
Reference: 213.0500
POLINI high end slats.
Reference: 215.0118
Valve system with flexible sleeve for increased power and torque!
Reference: 215.0456
POLINI high performance intake kit with valves for 125, 80, 150 PX 2T motor from VESPA.
Reference: 215.0233
For an improved admission with carburettor POLINI CP 24mm, fixing by 3 holes! High performances guaranteed!
Reference: 284747
High quality slats, ideal to increase your performance on PIAGGIO scooter engine.
Reference: 215.0204
Ideal to pass on a system has flaps and thus to gain in couple, power and consomation! To accompany a 17,5mm POLINI CP special for the best!
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 215.0203
Unique and powerful design, POLINI monolamelle system for VESPA carburizing scooter in 19 or 21mm diameter with 2 fixing holes. For carburettors origin or CP POLINI!
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: 215.0205
For improved intake (to pass over valve system) with carburettor POLINI CP or other flexible mounting in Ø22 to 26mm, fixing by 2 holes as the origin.
Reference: 27 9490.C0
Valves VL13, very powerful! Above the VL11!
Reference: 215.0202
Unique and powerful design, POLINI monolamelle system for VESPA scooter.
Reference: 215.0116
Inlet kit with single-flap valves! Gain of torque and very high power in relation to a mounting without valves. For carburetor of origin or CP 19 and 21mm rigid special or flexible standard.
Reference: 213.0012
High-end valves complete with slats. To be assembled in the pipes admission kits with POLINI valves from VESPA, APE ...