Reference: 213.0020
2 slats POLINI valves for valve box and casings without support Peugeot 103 and MBK 51
Valves for POLINI, DR RACING, ATHENA ...
Banner
For all your Peugeot 103 sp, mv, mvl, lm… equipped with original casings, to improve your admission there are the famous POLINI valve boxes. This valve box in combination with a suitable carburetor will promote gas passage, power and recovery without adding too much dead volume in the intake.
Indeed, on Peugeot 103 the admission, the original valves are really badly made and badly studied, they enter very quickly in frequency of vibrations not tightened only because of how they are placed.
This box will therefore be much better placed, it passes through 2 very good quality 0.30mm carbon slats in order to have a much better curve. You can also add the article vulcanized valve box to further increase the performance of your moped. This complete POLINI valve box will especially save you in high speeds. We advise to remove the stops slats on this box, they really obstruct the admission too much.
This box is 19mm in size so intended for Ø17.5 to 21mm DELLORTO PHBG rigid carburetors (24mm fixing)
Between the 15 and 19mm model, only the pipe changes. You could very well make pass a 15 in 19 and vice versa.
The pack is delivered complete :
-Extension box
-Full screws
-Pack full seal
-Valves 2 slats 0.30mm carbon
-Pipe rigid aluminum in 19mm
- Explanatory notice, advice and assembly
Reference: 213.0020
Valves for POLINI, DR RACING, ATHENA ...
Reference: 215.0308
The replacement pipe for valves boxes POLINI on PEUGEOT 103 SP, MV, LM ...
Reference: 209.0260
Complete gasket set for POLINI valve box on PEUGEOT 103.
Reference: 27 7366.C0
MALOSSI Carbon Cutting Boards available in 0.30, 0.35 and 0.40mm. Top of the line. For manufacturing slats on a 2-stroke engine, thicknesses to choose from!
Reference: 20 6138
Ideal to put a carburetor DELLORTO 21 PHBG on your PEUGEOT XP using a system of real valves!
Reference: 507028
Ideal for gaining performance and solidity at the slightest hit.
Reference: 213.0599
Planks for manufacturing POLINI carbon valve slats, certified high quality! Available in 0.25, 0.28, 0.30, 0.33, 0.35, 0.40 and 0.45mm. For all 2-stroke engines, choice of thickness!
Reference: 27 5614.K0
A set of KARBONIT slats, very nice to adjust your machine to the thickness of the valve slats by taking advantage of a good quality of KARBONIT fiber for a nicer cost than carbon.
Reference: 213.0013
RACING valves with diffuser, mono-slats for housings POLINI 103, 51, MINICROSS POLINI , APE...
Reference: 27 4235.K0
Valves that are suitable for both small and large configurations.
Reference: 27 2643.K0
The luxury version of the VL7, an aluminum base, vulcanized ...
Reference: 27 7366.K0
Two 100X100mm boards in Karbonit MALOSSI available in 0.30, 0.35 and 0.40mm. It can be cut and therefore adapts to all 2-stroke motor vehicles. Choice of thickness.
Reference: 2715810.C0
The famous MHR Vl18 valves! Guaranteed performance!
Reference: 27 5614.C0
A premium carbon blade set, ideal for optimal adjustment.
Reference: 247766
Valves mounted in mono-lamelle fiberglass for your 103.
Reference: 002312
The only vulcanized valves on the market for PEUGEOT 103, with the added advantage of fiberglass slats!
Reference: 2714152.C0
Much improved version of MALOSSI VL15!
Reference: 27 5616.C0
A specific high-end set for your VL1 valves! Set your machine to perfection by choosing the best thickness and choosing noble materials for your slats!
Reference: 27 5616.K0
Ideal for selecting the right slat thickness for your machine, made of high-end KARBONIT MALOSSI fiberglass.