- Pack
Reference: 3413216
Piston 3 segments MALOSSI Ø63mm axis 14mm for kit 185cc MALOSSI on YAMAHA X-CITY, X-MAX, YZF, WR, MBK CITYLINER
Replacement MALOSSI piston upscale with 4 sizes of wear available to choose from!
Banner
You've waited for all ... The big kit that will finally roar your maxi 125cc scooters YAMAHA X-MAX, YAMAHA X-CITY, MBK CITYLINER & MBK SKYCRUISER! Here it is, the famous kit Ø63mm which is also delivered with the electronic multi-curve calculator As usual MALOSSI has made a powerful kit, solid, torquey and very high-end. This little monster projected your 125cc engine to 182.58cc real extreme performance. MALOSSI has for this thermal group found the perfect ratio race / diameter, this cylinder serras without problem supported by your crankshaft of origin. It is already running in competition and endurance is therefore to say if it is tested ... Force Master 2 is the electronic box that allows to change the injection to fit perfectly to the new 4t Malossi thermal unit. This box has been programmed with different programs to be perfectly matched to your vehicle, whatever its configuration! With these boxes 4 curves are offered to you ...
- curve 1: best performances with the original cylinder
- Curve 2: Malossi cylinder and original muffler
- curve 3: Malossi cylinder and modified exhaust
- curve 4: excl.
Let's see instead how MALOSSI did to increase the performance of the high engine, it did not stop of course increased the diameter of the piston cylinder! Here are the technical characteristics of the kit:
Cylinder
Bore: Ø 63 mm; Stroke: 58.6 mm;
Cylinder capacity: 182.58; Compression Ratio: 10.6: 1.
• Material: primary aluminum alloy with high silicon content
tempered and tempered, cylinder liner with carbide application
silicon in a galvanic nickel matrix and crossed smoothing by
two diamond passages, with very strict tolerances
• Machining: using high precision CNC machine tools
• Cylinder-piston couplings with coupling tolerance of 0.05
mm
• Heat exchange surfaces recalculated and enlarged
Piston
• Extra compact with three segments
• Material: special aluminum alloy with high silicon content
low thermal expansion with application of tin on the walls of
sliding
• Machine tool machining at CN
• Lightened and reinforced
• Increased heat exchange surfaces
segments
• High sliding specials and very high mechanical resistance
• I ° segment compression in nitrided steel and chromed
• II ° special cast iron segment
• Three-piece scraper ring in special steel, chromed
With this kit you will be in the position of an ultra robust, powerful and safe! No more mole acceleration, slower spike speeds ... The disappointing recovery! Attention, this kit is still not put in any hands ... Driver warned!
Mounts on (MALOSSI list):
MBK CITYLINER 125 4T LC euro 3
MBK SKYCRUISER 125 4T LC
YAMAHA X CITY 125 ie 4T LC euro 3 (E3A5E)
YAMAHA X MAX 125 ie 4T LC euro 3 before 2008
YAMAHA X MAX 125 ie 4T LC euro 3 from 2009 to 2013
YAMAHA X MAX 125 ie 4T LC euro 3 from 2014 to 2016
Warning! Do not mount on EURO 4 because the housing is only mounted on EURO 3, on EURO 4, take the EURO 4 box separated from the cylinder kit!
Reference: 3413216
Replacement MALOSSI piston upscale with 4 sizes of wear available to choose from!
Reference: 1113280B
Pack seal essential for a leak-free reassembly of your high engine MALOSSI.
Reference: 3511204B
Mandatory Segments of replacement for any maintenance or in case of loss of compression of your kit high Ø63mm, MALOSSI 185cc engine.
Reference: 3611263
Ideal for the refurbishment of your engine.
Reference: 2312422
Replacement spindle reinforced MALOSSI Ø14mm X internal diameter 8mm X length 47mm.
Reference: 5519537
An electronic unit which allows you to adjust your injection with 4 different programs. Guaranteed performance gain and increased engine reliability EURO 3 before 2017 only!
Reference: P400485100035
A kit with a monstrous couple that will not fail to respond.
Reference: P400485100045
Ultra-powerful and ultra-robust kit! Special for X MAX scooter, X CITY, CITYLINER, SKYLINER ... 125 from 2006 to 2012.
Reference: 3117968 + 5518172
Enough to increase the performance of your N-MAX 150 and 155 as much as possible... EURO 3 or EURO 4
Reference: 3111248
A powerful kit with a lot of torque. What just to have fun on the track.
Reference: 3117968 + 5519527
Enough to increase the performance of your N MAX and X MAX 125 in EURO 5 as much as possible
Reference: 3113792
A little monster of torque and power ready to be mounted without adjustment for maximum immediate power.
Reference: 3115423
A performance monster for your TMAX 530 4 stroke!
Reference: 485398
Ideal for a refurbishment of your maxi-scooter 125cc 4 times.
Reference: 030317C
Ideal for a complete refurbishment of your engine and start on a good solid foundation!
Reference: 3113025
A powerful kit with a lot of torque. What just to have fun on the track.
Reference: 166.0115
Very good aluminum kit for YAMAHA CYGNUS 125cc injection, delivered with its engine reprogramming box! Couple and power at the top!
Reference: kit_rrd_n-max_155
155cc kit for MINARELLI 125 and 155 4T engines of MBK, YAMAHA ... N MAX, TRICITY ...
Reference: P400485100058
Ultra powerful and ultra robust kit! Special for scooter N MAX 125 from 2015 to 2016.
Reference: 518717
Ideal for refurbishing your maxi-scooter, 125cc motorcycle while giving it more power.
Reference: 9929380
The famous POLINI in cast iron, very robust and torquey! For carburettor engine!
Reference: P400485100057
Kit 183 for YAMAHA N MAX and MBK OCITO 150!
€291.66
€268.330
|
delete
|
||
The product is no longer available in this quantity.
|
€324.990
|
delete
|
||
The product is no longer available in this quantity.
|