MOTUL DOT 3 & 4 brake fluid 500ml

DOT 3 and 4 brake fluid (can be used in all systems requiring 5.1 or DOT 5, 4, 3, 2 ...), high boiling point at 245 ° C when it is dry and the fluid is new.

 

DOT 3 & 4 Brake Fluid
100% Synthetic fluid
For hydraulic brake control and
clutch
DOT 3 / DOT 4

USES
For all hydraulic brake and clutch control systems meeting manufacturers' DOT 4 and DOT 3 recommendations.

PERFORMANCE
STANDARDS: FMVSS 116 DOT 4 and DOT 3
SAE J 1703
ISO 4925 (4 and 3)

Very good thermal resistance and stability:
The high boiling point (245 ° C / 473 ° F), much higher than the limit imposed by the standard DOT 3 (205 ° C mini / 401 ° F mini) and DOT 4 (230 ° C / 446 ° C) , helps maintain braking efficiency even when the brakes are heavily used.

Security :
The wet boiling point (160 ° C / 320 ° F) higher than conventional fluids DOT 3 (140 ° C min / 284 ° F min) and DOT 4 (155 ° C / 311 ° C) allows the product to be used Longer. In fact, DOT 3 / DOT 4 and DOT 5.1 brake fluids have the property of absorbing moisture from the air, which reduces their boiling point and therefore braking safety.

The wet boiling point is representative of the state of the fluid after 1 year of use.

Perfectly neutral with the seals used in braking systems. Anti corrosion.

USAGE TIPS
Miscible with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products.
Do not mix with mineral (LHM) and silicone (DOT 5 silicone base) liquids.

Store the product in its packaging, tightly closed and protected from moisture.
Aggressive chemical product towards hands, paints and varnishes.
In case of contact with the skin, rinse thoroughly.

Oil changes: 12 to 24 months according to the manufacturers' recommendations.
PROPERTIES
100% synthetic fluid based on polyglycols.
Yellow color
Dry boiling point 245 ° C / 473 ° F
Wet boiling point 160 ° C / 320 ° F
Viscosity at -40 ° C (-40 ° F) 1350 mm² / s
Viscosity at 100 ° C (212 ° F) 2.3 mm² / s