Reference: 489829
Flange of variator TEKNIX for motor scooter MINARELLI (nitro, ovetto, booster, bw's, stunt ...)
Ideal to repair his drive on his scooter BOOSTER / BW'S / NITRO / AEROX / SR50 / F12
Banner
Here is the limiting flange or spacer for MALOSSI Multivar variator. Of good quality, this element will be useful during the homologation of the variation part of your 2 wheels. For Ø20mm variator barrel, 3mm thick and 7mm wide. Its installation will prevent the variator from opening and therefore restrict the launch of the motor at about 45 km / h.
Reference: 489829
Ideal to repair his drive on his scooter BOOSTER / BW'S / NITRO / AEROX / SR50 / F12
Reference: 483686
Set of 3 sliders for all roller drives
Reference: 4133
Quality seal essential to avoid any engine problems.
Reference: 324479
Set of 3 sliders for all DOPPLER drives with roller S1R and ER1.
Reference: 901701021900
Ideal in case of wear or loss of your old nut.
Reference: 9915540
Essential part for the operation of your controller.
Reference: 9923130
Ideal in case of wear of your old barrel to start afresh at a lower cost.
Reference: 9915530
A spacer reinforced by TOP performance which is mounted on the origin at a lower cost.
Reference: 482371
M10 nut replacement, standard quality original!
Reference: 461205 / 9915460
Indispensable for the maintenance of your drive or drive!
Reference: 9915460
Indispensable for maintaining your drive or flywheel! Original TOP PERFORMANCES quality part.
Reference: 9915480
A good quality product cheaper than the original. Ideal for refurbishing your scooter.
Reference: 090400
Essential part for the proper functioning of your starting mechanism on foot, kick.
Reference: 9916790
Spare parts essential for the proper functioning of your TPR GP on minarelli scooter.
Reference: 293040
Identical to the original but cheaper.
Reference: 37 8175
Ideal for refurbishment at a lower cost.