Banner
There are 29 products.
Active filters
Reference: 1314516B
Connecting sleeve for the MALOSSI adjustable intake pipe carburettor 15 to 21mm (fixing Ø23 to 25mm) ( PIAGGIO SCOOTER engine).
Reference: 1313769B
MALOSSI MHR adjustable intake pipe connecting sleeve carburettor 28 to 30mm (fixing Ø35 to 39mm) piaggio scooter
Reference: 215.0448
Connecting sleeve of the adjustable intake pipe POLINI carburettor 19 to 24mm (fixation Ø28,5mm) (MINARELLI SCOOTER engine, AM6, DERBI ...).
Reference: 215.0444
Connecting sleeve of the adjustable intake pipe POLINI carburettor 26 to 28mm (fixing Ø30 to 34mm) ( PIAGGIO and MINARELLI SCOOTER engine).
Reference: 215.0443
Connecting sleeve of the adjustable intake pipe POLINI carburettor 26 to 30mm (fixing Ø35 to 39mm) ( PIAGGIO SCOOTER engine).
Reference: 215.0442
Connecting sleeve of the adjustable intake pipe POLINI carburettor 15 to 21mm (fixation Ø23 to 25mm) ( PIAGGIO SCOOTER engine).
Reference: 71813000
Here is the carburettor bellows for the VESPA scooter intake pipe.
Reference: 11251700
Replacement aluminum intake sleeve for your VESPA!
Reference: 1313799B
MALOSSI MHR adjustable intake pipe connecting sleeve 28 to 30mm (Ø35 to 39mm fixing) minarelli horizontal (nitro, aerox).
Reference: 144.480.001
Specially designed to fit PWK or KEIHIN carburettors, can also be mounted on others!
Reference: 223.0124
Specially designed to mount CP POLINI carburettors, can also be mounted on others like the PHBG!
Reference: 223.0123
Specifically designed to mount CP POLINI carburettors, can also be mounted on others!
Reference: 491146
Ideal for transforming the rigid assembly of its SHA carburetor into a flexible assembly!
Reference: 13 6085B
Specially designed to mount flexible mounting PHBGs on a pipe intended for a rigid PHBG. Model with greater length (37mm).
Reference: 440161
A quality sleeve that absorbs vibration very well for a better arrival of gases.
Reference: 291582
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: 13 4929B
Flexible upscale sleeve Ø35mm fixing each side! Special carburetor and big thrust configuration!
Reference: GOM-04
Quality flexible sleeve, Ø35 fixing at 37mm on each side!
Reference: GOM-03
Flexible flexible sleeve, fixing Ø31 and 34mm on each side!
Reference: GOM-02
Quality flexible sleeve, fixing Ø34 to 38mm on each side!
Reference: GOM-01
Pliable quality, fixing Ø33 to 36mm on each side!
