List of products by supplier CGN

Reference: 833

Front or rear brake shoes Ø80mm by thickness 18mm TEKNIX for PEUGEOT 103 / MBK 51 / MOTOBECANE AV10 / AV7

Quality jaws delivered complete and all this at a low price.

Reference: 802

Super-reinforced CGN clutch bell for Peugeot 103 SP, MV, MVL, LM, VOGUE ...

A high-end clutch bell, reinforced model which will allow you a more frank grip and avoid deformations.

Reference: 170822

End cap for Ø5.5mm ALGI sheath length 12mm / Ø6.1mm

Ideal for refurbishing your cable passages!

Reference: 122017

Belt original type TEKNIX smooth 14.5 X 7 X 772mm for MBK 51 / Motobecane av10 / av7

A very good quality original type belt for a consistently low price.

Reference: 365952

Elbow pipe DOPPLER ER2 Ø19 flexible assembly with sleeve for MBK 51 / av10 motobecane

A perfect pipe for mounting a carburetor in flexible mounting with a diameter of 17 to 21mm. It is very short and very well ventilated to have a good gain in power.

Reference: 4116

Piston clips (shaft ring) TEKNIX in G Ø13mm X 1,2mm for MBK 51 / motobecane av10, av7

A small, inexpensive room that will support small configurations very well.

Reference: 466575

Kickstarter (pinion) for MBK 51, MOTOBECANE AV10

A part very often worn at the level of the teeth!

Reference: 4175

Clutch drum / chrome face bell CGN on MBK 51 / MOTOBECANE AV10 / AV7 (variator model)

For low cost refurbishment, clutch bell for MBK 51, variator model.

Reference: 323821

2 reinforced bearings SKF steel cages + 2 spy joints (spinnaker) of vilo TEKNIX for MBK 51, MOTOBECANE AV10, AV7

Premium pack that can withstand any big setup.

Reference: 2775

Pair of adjustable chrome TUN'R shock absorbers, length 320mm for mopeds

Good quality shock absorbers which will give a nice chrome look to your mob.

Reference: 179485

Covering screw ALGI Ø5mm X L.12mm cross slot for Peugeot 103 and others

Ideal for a safe and clean mounting your original fairings Peugeot 103 or other uses.

Reference: 441651

MERYT number stickers in white, size 13cm (width)

Ideal to put your favorite number! Large model, size 13cm.

Reference: 461207

DOPPLER A4 sticker sheet (21x29.7cm) fork, swingarm, helmet ...

Complete sheet of sticker to be put in many places, helmets, fairings ....

Reference: 777

TUN’R original chrome and red type rear light for Peugeot 103 moped or other models

Reference: 455354

Yellow DOPPLER support plate for ER3 variator on Peugeot 103 and MBK 51

Replacement pads of ideal qualities in case of wear or breakage.

Reference: 672

Complete TEKNIX Peugeot 103 / fox / Honda wallaroo decompressor system

Complete system at a good price and of very good quality.

Reference: 6541

Throttle cable CGN Ø1.2mmX2M, ball notch Ø5X7mm for Peugeot 103 or other models

Gas cable 5x7, with 2 meter length, adaptable Peugeot 103.

Reference: 441283

Crankshaft DOPPLER ENDURANCE (crankshaft / crankshaft) Peugeot 103 SP, MV, MVL, LM, VOGUE ... electronic cone

The best with the BIDALOT, a concentrate of solidity, balance, aesthetics ... For SP, MV, VOGUE ... In electro cone.

Reference: 2867

Pair of 2 toe clips, flat black TUN’R footrests (on pulley axle) for Peugeot 103, MBK 51, ...

Ideal if you want to remove the original pedals.

Reference: 327114

Reinforced belt DOPPLER 13X8X870mm by 38 ° for Peugeot 103 sp, mv, mvl, lm, ...

DOPPLER high quality reinforced belt for 103 SP, MV, MVL, VOGUE ...

Reference: 2122.02.3025

Trimmer / cable tensioner machined in the mass Ø10mm threading / end for Ø6mm sheath for motor bike and other (free brake nut)

High quality piece machined in the mass Ø10mm threading for Ø6mm sheath tip.