Reference: JAC-08
BARIKIT of 2mm base Cale MINARELLI HORIZONTAL (ovetto, nitro, aerox, jog ...)
The shim needed to run long crankshafts 43/44 / 45mm on minarelli horizontal!
Banner
Set of 4 elongated competition cylinder head nuts. These nuts allow you to come out of the fins on the air cylinder head and to be able to tighten them with a flat torque wrench so in the absence of any friction which allows you a perfect tightening. You will have to use them with 4 washers recess.
Length 35mm
Original type thread therefore M7 Peugeot 103 and MBK 51 / motobecane (av10) av7 ...
Weight of the 4 nuts: 72 grams
Maximum thread size that can enter the nut: 30mm
They are widely used in competition on air or even liquid cylinder heads. Some have already spoken of virtues in cooling but they do not improve cooling in any way.
Reference: JAC-08
The shim needed to run long crankshafts 43/44 / 45mm on minarelli horizontal!
Reference: 315.0023
POLINI bleed plug for 1/8 cylinder head with copper gasket
Reference: 00002.87
Set of 4 M7 nuts with their 4 washers.
Reference: 12400912
A wedge required for the passage of large crankshafts and high engine FACTORY from BIDALOT!
Reference: 87175000
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: JAC-07
The shim needed for crankshaft race long 42 / 43mm on minarelli horizontal!
Reference: 317.0108
Reinforced elongated studs special for horizontal liquid minarelli motor scooter.
Reference: JAC-09
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Reference: 472434
Ideal for redoing a cylinder in the event of primer, heating or simply to remove micro-scratches that hold the oil.
Reference: GR00711
For refurbishment of your high engine 70cc black DR Racing on minarelli horizontal liquid scooter.
Reference: 87171100
Ideal in case of breakage, loss or worn thread of your old nut.
Reference: 311.0112
POLINI bolt connection for Minarelli or Piaggio and many other models.
Reference: 093096
Studs enhanced, processed and much cheaper than the real origin.
Reference: 317.0005
Set of 2 M6 studs that can be used for many applications.
Reference: 0716344
The shim necessary for crankshafts 85mm long connecting rod on horizontal minarelli!
Reference: 12512972
Reinforced and treated high-end stud for high engine BIDALOT Racing FACTORY.