Reference: 206.0142
Chrome steel segment Ø64X1,2mm for POLINI 165cc kit on 125cc CAGIVA ALETTA ROSSA, DAKAR, ELEFANT and other 2 times
To be changed at the slightest loss of compression, generally within 5000 to 6000km!
Banner
Piston bi-segment Ø64mm POLINI, for kit 165cc on CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO and other 2 times. We have wear sizes A / B / C and D, to be selected according to the wear of your cylinder. The piston is complete, so it contains the piston, the two high quality steel segments, the piston pin and finally the two clips in G.
Formerly delivered as presented above but the old version of the piston presented some defects, that's why a new version was made by correcting the flaws preview, POLINI took the opportunity to add a preparation on the rear skirt so to improve the sweeping and filling of the intake as well as 2 lateral grease nipples. So do not be surprised to receive the new version as in the main photo.
A: Ø63,92mm
B: Ø63.93mm
C: Ø63.94mm
D: Ø63,95mm
CAGIVA MODEL C10 and C12 (a special C9 version is available)
Reference: 206.0142
To be changed at the slightest loss of compression, generally within 5000 to 6000km!
Reference: 272.0100
Piston clips for Ø16mm axle, often used from 125cc!
Reference: 209.0133
Ideal for reassembly without risk of leakage!
Reference: PI.01.54A.VG
VERTEX / ITALKIT piston in Ø54mm bi-segments for high original engines and ITALKIT on the ROTAX 122 and 123 of ARPRILIA RS, AF1, FUTURA, RS, PEGASO, TUAREG, RALLY, SIYNTESI, RX, RED ROSE ...
Reference: S4F06500002A
The replacement piston for your large ATHENA kits on TDR, DT, TZR ...
Reference: P-610-SA
BARIKIT piston for old CASAL 125 2T motorcycle.
Reference: 01.2202.025
PROX piston for YAMAHA YZ 125 2T engines from 1984 to 1986
Reference: P-311
BARIKIT piston for 125 2T engines with YPVS like the RD 125, DT 125 ...
Reference: PI.01.58A.V2
VERTEX / ITALKIT bi-segment piston for high original engines and ITALKIT on ROTAX 122 and 123 from ARPRILIA RS, AF1, FUTURA, RS, PEGASO, TUAREG, RALLY, SIYNTESI, RX, RED ROSE ...
Reference: PI.48.540.I1
VERTEX by ITALKIT replacement piston for CAGIVA ALETTA SST 125cc 2T motorcycle
Reference: PI.26.56A.VG
High quality piston for HONDA NS F and MTX 125 2T.
Reference: P-650-SA
BARKKIT piston for 4FU engines of TZR, GPR, TDR, DTR, DT X, DT E ... 125 2T.
Reference: PI.68.560.VG
The replacement piston for the original 125cc single-cylinder, several sizes available!
Reference: PI.01.541.VG
VERTEX / ITALKIT mono-segment piston for high original engines and ITALKIT with CAST IRON jackets on ROTAX 123 APRILIA Extrema RS-SP.
Reference: P-392
Original type piston Ø56mm for HONDA MBX and MTX 125.
Reference: S4C05600003A
Ideal for refurbishing your ATHENA kit and original FONTE engine on your 125cc CAGIVA motorcycles.
Reference: 34 6537
A high-end piston with several ratings to choose from to change every 10,000 to 15,000 km.
Reference: PI.03.72B.VG
Replacement piston for motorcycle BETA TECHNO, ALP, TRIAL ... 250cc 2T from 1995 to 1997
Reference: 001402/1.B
A high-end piston with several dimensions to choose to change every 10 000 to 15 000 km.