Reference: 206.0142
Chrome steel segment Ø64X1,2mm for POLINI 165cc kit on 125cc CAGIVA ALETTA ROSSA, DAKAR, ELEFANT and other 2 times
To be changed at the slightest loss of compression, generally within 5000 to 6000km!
Banner
Piston bi-segment Ø64mm POLINI, for kit 165cc on CAGIVA MITO, PLANET, RAPTOR, FRECCIA, TAMANACO and other 2 times. We have wear sizes A / B / C and D, to be selected according to the wear of your cylinder. The piston is complete, so it contains the piston, the two high quality steel segments, the piston pin and finally the two clips in G.
Formerly delivered as presented above but the old version of the piston presented some defects, that's why a new version was made by correcting the flaws preview, POLINI took the opportunity to add a preparation on the rear skirt so to improve the sweeping and filling of the intake as well as 2 lateral grease nipples. So do not be surprised to receive the new version as in the main photo.
A: Ø63,92mm
B: Ø63.93mm
C: Ø63.94mm
D: Ø63,95mm
CAGIVA MODEL C10 and C12 (a special C9 version is available)
Reference: 206.0142
To be changed at the slightest loss of compression, generally within 5000 to 6000km!
Reference: 272.0100
Piston clips for Ø16mm axle, often used from 125cc!
Reference: 209.0133
Ideal for reassembly without risk of leakage!
Reference: S4F056500010
The spare piston for 125cc and twin-cylinder 240cc YAMAHA 2T!
Reference: S4F05600002A
ATHENA forged piston in 55.94, 55.95 or 55.96mm for TZR and TDR 2T 125cc.
Reference: PI.01.54A.VG
VERTEX / ITALKIT piston in Ø54mm bi-segments for high original engines and ITALKIT on the ROTAX 122 and 123 of ARPRILIA RS, AF1, FUTURA, RS, PEGASO, TUAREG, RALLY, SIYNTESI, RX, RED ROSE ...
Reference: PI.60.59A.VG
The replacement piston for the original 250cc two-cylinder, several sizes available!
Reference: PI.26.56A.VG
High quality piston for HONDA NS F and MTX 125 2T.
Reference: 01.2250.000
The replacement piston for the original 125cc single cylinder, several sizes available!
Reference: P-536-1A
Single segment BARIKIT piston for original high engine and BARIKIT on the ROTAX 122 of APRILIA RS, AF1, EUROPA, PEGASO, and other 2 times.
Reference: PI.07.57B.VG
Mono-segment piston of very good quality, mono-segment, delivered with chromed segment.
Reference: P-650-SA
BARKKIT piston for 4FU engines of TZR, GPR, TDR, DTR, DT X, DT E ... 125 2T.
Reference: S4C05600003A
Ideal for refurbishing your ATHENA kit and original FONTE engine on your 125cc CAGIVA motorcycles.
Reference: PI.68.560.M
The replacement piston for the original 125cc single-cylinder, several sizes available!
Reference: PI.07.56A.VG
Ideal for refurbishing your ITALKIT aluminum kit on your CAGIVA 125cc motorcycles.
Reference: 01.2252.050
PROX piston for YAMAHA DT 125 2T 18G engines (cylinder with valves, air cooling).
Reference: P-392
Original type piston Ø56mm for HONDA MBX and MTX 125.
Reference: 204.0008/A
Ideal for refurbishing your POLINI kit on your CAGIVA motorbikes! C9
Reference: 34 6537
A high-end piston with several ratings to choose from to change every 10,000 to 15,000 km.