
Reference: 2707
only idle screw for carburettor DELLORTO PHBG
The idle screw without its spring for your PHBG!
Banner
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 30 3339
A quality transparent tank with plug for PHBG and PHBD carburettor.
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 26 3991
A complete kit that will allow you to pass your cables as you wish.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 01476_00
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 1263
The tension adjuster which is placed at the end of your tubes.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 09538_00
Ideal to pass your choke cable pull or to repair your PHBG!
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!