Banner
Pair of MALOSSI intake seal of 0.5mm on scooter VESPA PX 200 E.
2 intake joints with a thickness of 0.5mm that you will find on the carburation kit PHBH 30 on your scooter VESPA PX 200 E.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: S410000200002
ATHENA air filter foam to cut, size 30X40cm / thickness 10 or 12mm uncompressed High quality at low price!
Reference: 42053005
Replacement choke for your carburetor.
Reference: 17791000
Replacement float rod for DELLORO SI, SHB, SHBC carburetor.
Reference: 24227700
Replacement sealing washer for DELLORTO carburettor tank screws.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 19 3845
Ideal in case of breakage or loss for reassembly at a lower cost!
Reference: 11027
Good quality necklace that can tighten your strongest clamping without risk of breakage.
Reference: 21 0868
A high-end collar that can tighten your tightening stronger without risk of breakage.
Reference: 11033
A good quality collar which allows you to tighten your tightenings more securely without risk of breakage.
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 42005951
Replacement spring for your SHBC 19.19 E/20.20 D/E/L carburettor valve
Reference: 11028
A good quality necklace that can tighten your strongest clamping without risk of breakage.
Reference: 292437
Spare sleeve right for TUN 'R air filter.
Reference: 11026
A good quality necklace that can tighten your strongest clamping without risk of breakage.
Reference: 490405
Cut out teknix air filter foam, size 33X66cm / thickness 10mm uncompressed.
Pair of MALOSSI intake seal of 0.5mm on scooter VESPA PX 200 E.
