Here is a pair of MALOSSI competition rear shock absorbers, the top of the quality / style / price ratio, nothing to do with the original shock absorbers.
They are oleopneumatic, made at PAIOLI sport in Italy and designed for both competition and everyday riding. They will be able to absorb bumps and various road obstacles while accepting the acceleration of your engine power. There is a small sticker discreetly placed inside the shock absorbers to recall the model of these.
The shock absorber rods are in Ø12 mm made of C43 steel (tempered and annealed) , we will appreciate the oil used which is special and of low viscosity, practically insensitive to temperature variations. The pistons are made of steel and sintered bronze with slide pad of the LUBRIFLON PTFE 870 type (component modified and charged with bronze). We will also appreciate the adjustment of the spring hardness by 4 positions on the bottom of the shock absorber but unfortunately delivered without adjustment keys.
Technical characteristics:
Technical characteristics
Type: oleo-pneumatic shock absorber
Use: on the road
Damper rod Ø 12 mm in C43 steel - hardened and annealed
Steel and sintered bronze piston
New Swedish steel lamellar system
LUBRIFLON PTFE 870 type piston slide shoe (modified bronze-filled compound)
Slip on sleeve-GUIDE DU (compound obtained by sintering a layer of spheroidal bronze on a suitably pressed mild steel strip, with successive impregnation, and transfer of a mixture of PTFE + FB)
Scraping ring in Polyester resin SEALTHANE degree 9345
Spring pre-loading regulator by means of collar with 4 positions
Special oil with low viscosity and virtually insensitive to temperature variations
Mounts on the following models:
MALAGUTI PHANTOM MAX 200 4T LC ( PIAGGIO )
MALAGUTI MADISON 180 4T LC ( PIAGGIO )
MALAGUTI MADISON 200 4T LC ( PIAGGIO )
MALAGUTI PHANTOM MAX 250 4T LC ( PIAGGIO M361M)
Adaptable to other models such as the EASYMAX 125, MBK 51 or PEUGEOT 103 competition...
.png)
.png)
