
Reference: 159646
Chainring, P2R aluminum pulley with 11-tooth sprocket for Peugeot 103 SP, MV, MVL, LM, VOGUE ...
A piece that will give you a beautiful sporty and efficient TUNING appearance.
Banner
Here is the new ER86 pulley from DOPPLER. This evolution of the clutch pulley DOPPLER ER2 mainly offers a big improvement! That of being able to adjust by advancing or delaying the grip of the clutch and without any disassembly, through the ventilated bell!
The bell is also very evolved, it is a ventilated scooter bell, reinforced and perfectly balanced for the higher rotational speeds. The 3-jaw clutch is a model scooter, it is also quite suitable for very high speeds, high temperatures and prolonged ... This pulley, more advanced is particularly suitable for those seeking maximum performance in hot springs acceleration and recovery!
With a lightly tuned variation, a powerful engine that only requires turns and a good spring motor, you will get acceleration and lightning rises, while having a nice clutch pulley (which vibrates less) and robust!
- Comes with pinion of 11 teeth
-No boot to the stroller possible, you must keep the original kick
Contractual photos very soon.
Mounts on PEUGEOT 103 SPX, MVX, CLIP and RCX (machines with kick and pulley clutch of origin).
Reference: 159646
A piece that will give you a beautiful sporty and efficient TUNING appearance.
Reference: 485297
Ideal in case of breakage or wear of your old circlip.
Reference: 702
The original spare pulley shaft in 24 teeth for PEUGEOT 103 mopeds.
Reference: 6635
An original PEUGEOT HK1618 socket, very high quality.
Reference: 515263
Replacement sprocket for your pulley DOPPLER OPEN.
Reference: 739174
A high-end piece by PEUGEOT nothing to do with the other pieces original type.
Reference: 199582
A piece that will give you a beautiful sporty and high-performance TUNING appearance.
Reference: 508550
Ideal for starting fresh, mounts on ER86 DOPPLER pulley all models also on the original SPX / RC X / CLIP / MVX clutch pulleys.
Reference: 4269
Ideal for reassembly without play at a lower cost.
Reference: 8815
Ideal for reassembly without play with a quality product at a lower cost.
Reference: 1969
What finally to offer acceleration to your PEUGEOT 103 SP, MV, MVL ... And what to be able to put a racing variator while preserving a clutch so not to be in direct drive!
Reference: 491174
Clutch pulley ER86 with adjustable clutch without disassembly!
Reference: 8807
A quality product at a low price. for 103 SP, MV, MVL, VOGUE ....
Reference: 10181
A piece that will give you a beautiful sporty and efficient TUNING aspect.
Reference: 517368
Quality pulley for your MBK 51 moped!
Reference: 715378
Reinforcement plate for your moped!