Reference: 510120
Chainring, CGN aluminum pulley with 11 tooth pinion for Peugeot 103 SP, MVL, VOGUE, MBK 51 ...
A piece that will give you a beautiful sporty and efficient TUNING aspect.
Banner
Here is the new ER86 pulley from DOPPLER. This evolution of the clutch pulley DOPPLER ER2 mainly offers a big improvement! That of being able to adjust by advancing or delaying the grip of the clutch and without any disassembly, through the ventilated bell!
The bell is also very evolved, it is a ventilated scooter bell, reinforced and perfectly balanced for the higher rotational speeds. The clutch 3 jaws is a scooter model, it is also quite suitable for very high speeds, high temperatures and prolonged ...
This pulley, more advanced is particularly suitable for those who seek the maximum performance in acceleration and recovery baths! With a lightly tuned variation, a powerful engine that only requires turns and a good spring motor, you will get acceleration and lightning rises, while having a nice clutch pulley (which vibrates less) and robust!
Axis in Ø16mm by 255mm
Pulley enØ 210mm (width for belt 14,5mm standard)
Delivered with pinion of 11 teeth
Mounts on MBK 51 / MOTOBECANE Magnum, swing, club, hard rock, av88, av89, av44, SP50 ....
Reference: 510120
A piece that will give you a beautiful sporty and efficient TUNING aspect.
Reference: 800
Ideal for restarting, mounts on pulley ER2 DOPPLER all models also on the original clutch pulleys of SPX / RCX / CLIP / MVX.
Reference: 199582
A piece that will give you a beautiful sporty and high-performance TUNING appearance.
Reference: 4269
Ideal for reassembly without play at a lower cost.
Reference: 329807
The spare shaft of the DOPPLER ER2 clutch pulley mounted on your MBK, 51, MAGNUM, PASSION, AV10, AV7, AV88 ... In addition to this, you need to know more about it.
Reference: S715385
Ideal for winding without a game with a lower-cost quality product.
Reference: 511877
Excellent for not having play in your pulley / chainring. Attention limited quantity!
Reference: 473467
Ideal for repairing your DOPPLER ER2 clutch.
Reference: 501442
Motor spring only, ideal for making a "homemade" mainspring or for repairing its DOPPLER spring (or adaptation to another brand).
Reference: 512222
Engine spring retaining part taken from the chassis
Reference: 4272
The Ø16mm spare crank axle with 28 teeth for MBK 51, MOTOBECANE ....
Reference: 499336
Ideal for starting fresh, mounts on ER2 DOPPLER pulley for all PEUGEOT 103 / MBK 51 models except SPX, RC X, MVX, CLIP.
Reference: 526321
Ideal for refurbishment on MOTOBECANE 89 mopeds
Reference: 143216
Ideal in case of wear of your old plate for repair and refurbishment at a lower cost.
Reference: 8815
Ideal for reassembly without play with a quality product at a lower cost.
Reference: 491370
Indispensable for the proper functioning of your AV10, AV7 ... engine.