Reference: 247766
Inlet valves DOPPLER ER2 fiberglass for casings origin peugeot 103
Valves mounted in mono-lamelle fiberglass for your 103.
Banner
Ideal for mounting your flexible carburetors from 19 to 21mm, the intake pipe is the more upscale market for Peugeot 103, it is extremely short and well venturisée / studied.
It has a machining (label type) to set a flexible sleeve, the latter is also included with this pipe, and 2 clamps, you can install your carburetor 19 has 21mm flexible mounting (mounting diameter the sleeve 21 is 25mm).
DOPPLER logos are registered on each side of the pipe, remember that the flexible mounting avoids the emulsion of gas, vibrations and jolts in the carburetor, the assembly therefore do well improve performance!
Reference: 247766
Valves mounted in mono-lamelle fiberglass for your 103.
Reference: 365117
Valves mounted in mono-slat carbon 0.35mm for your 103!
Reference: 293370
A quality sleeve that absorbs vibrations very well for better gas flow.
Reference: 2017588
Special pipe for peugeot 103 vogue, ideal in combination of a carburetor of 15mm SHA and a valve sport!
Reference: 02 6238B
A pipe specially designed for MALOSSI housings. It is very short with good diffusion, micro-blasted and with horizontal bars to avoid any gas rebounds. Clearly a very well worked pipe which will be accompanied by a VL6 valve box or other AM6 valve and a 21mm carburetor.
Reference: 20 6138
Ideal to put a carburetor DELLORTO 21 PHBG on your PEUGEOT XP using a system of real valves!
Reference: 215.0370
Intake pipe for POLINI support housings incorporated on PEUGEOT 103.
Reference: 144.270.001
Flexible polini pipe 21mm for mini-moto and cross 2T POLINI, or mounting on POLINI crankcases with PEUGEOT 103 and MBK 51 supports!
Reference: 1399
Ideal in case of breakage or wear of your old part.
Reference: pack_pipe_malossi_AM6_DERBI_90°
MALOSSI pipe for adaptation on PEUGEOT 103 / MBK 51 requiring an angled admission! Center distance am6 / DERBI
Reference: 02 6488B
A pipe that mounts very well with a PHBG from 17.5 to 21mm. This pipe is corrected and revised for better distribution.
Reference: 02 5035B
The best to repair or modify the size of your MALOSSI valve boxes on your PEUGEOT 103 or MBK 51.
Reference: 02 1690B
An intake pipe adapted for a carburettor of 15mm or 16mm SHA on PEUGEOT 103!
Reference: 02 6487B
The best to accompany a 15 or 16mm SHA carburetor on your 103!
Reference: PIP07
Intake pipe for carburetor in flexible assembly from 15 to 21mm.
Reference: 215.0227
High quality intake pipe for mounting PHBG carburetors from 17.5 to 21mm.
Reference: 1402
An intake pipe with a good finish that will allow you to mount your carburetor Ø14 to 16mm while gaining power.
Reference: 1403
A pipe which will be perfect accompanied by a carburettor PHBG 19 to 21mm. This pipe is blasted with a good finish to avoid the rebound of gases.