Reference: MLR502R10
Exhaust muffler spring treated YASUNI long model (70mm)
A small spring very convenient in case of loss or breakage. In addition it is treated not to oxidize. This spring can be put on the cartridge as well as the motor.
Banner
Certified on-road pot, delivered with certificate of approval!
The YASUNI R2 exhaust is the excellent compromise between the R1 and R3! This welded welded pot with fine jail for better resonance will give you much better performance on 50 and 70cc medium power kits after unclamping, however the pot will lose its compliance and will not be allowed on public roads. Very solid, the materials are of excellent quality!
This exhaust does not make too much noise and offers a very good torque / power ratio! Several finishes available for the silencer: Kevlar, aluminum or the famous carbon also called black edition!
As you can see in the photo it comes with several adapters. So you can mount it very easily on other sports AM6.
This model is based on :
Aprilia
RS 50 all
RS 50 (AM6) all
Tuono 50 all
Mbk
X-Power 50 all
Rieju
RS2 50 all
RS2 50 Matrix all
RS3 50 all
Yamaha TZR 50
Reference: MLR502R10
A small spring very convenient in case of loss or breakage. In addition it is treated not to oxidize. This spring can be put on the cartridge as well as the motor.
Reference: ABZ060R
A high-end stainless steel necklace for optimal support while maintaining a beautiful aesthetic piece.
Reference: BOQ9015R
Ideal in case of breakage or wear for a repair at a lower cost while keeping are exhaust pipe.Outside diameter tubes 28mm!
Reference: FIB001R
Wool of the highest quality at the height of the sign YASUNI!
Reference: BSP915R
Complete hardware kit, ideal to refurbish your pot without change.
Reference: JUN101R
The muffler gasket for all your exhausts YASUNI, R1, R2, R3, C16 ...
Reference: JUN102R
The joints that go to both ends of the silencers YASUNI. Mounts on all motorcycle 50cc YASUNI except the R1!
Reference: JUN104R
The O-ring that mounts at the exit of the silencer YASUNI, mounts on all cartridges of the brand!
Reference: JUN106R
The seal that seals between the pot inlet and the tube / ball joint on R1, R2, HMR 2, SPR 3 ...
Reference: 9926370
The latest exhaust TPR, rare, highly efficient and super fine in addition to being approved!
Reference: VCR-RD25188/RE
An approved and efficient muffler for original engines, 50cc competition and 70cc entry-level.
Reference: P400010120003
A very good muffler RACING rare for your APRILIA RS, minarelli am6!
Reference: CARR04-C
Low passage sports exhaust for machines with am6 engine.
Reference: VCR-RD35188.BB
VOCA low passage competition exhaust for YAMAHA DT, MBK X-limit, PEUGEOT XPS, ....
Reference: H10022-GP
High-performance exhaust, fully tuned to original 50cc engines or prepared on minarelli am6 engine (RS, RS2, RS1, XR6 sports chassis...). Supplied with Ø28mm, 32mm adapter and 2-screw flange!
Reference: ECHAP723VG
A great pot for minarelli am6 sports motor bikes, gun metal silent only!
Reference: TUB821XB
One of the best pots for 80cc to 94cc, well known especially in the world of runners thanks to its light weight, astonishing power, a racing look and increased strength. In short, the best pot at the moment.
Reference: 15000367
Version 2017 80cc, BIDALOT RACING FACTORY low passage exhaust for YAMAHA DT, MBK X-limit, PEUGEOT XPS, ... .
Reference: 40253
A rare pot studied for competition for very advanced engines!
Reference: CARR04
Low passage competition exhaust for machines with am6 engine.
Reference: EC12
A very good exhaust that can match very good 70/80cc kits.
Reference: H10008
High performance and light and sporty exhaust for APRILIA RS 50 2T before 1999 with single swing arm (like the CHESTERFIELD)
Reference: CARR10-GP
Exhaust very powerful, quite tuned to big kits 80cc powerful engine minarelli am6 (sports chassis RS, RS2, RS1, XR6 ...). Comes with adapter Ø28mm, 32mm and flange 2 screws!
Reference: ESIL066UTRS
YASUNI replacement silencer for your 50cc mécaboites!
Reference: 15000867
Version 2017 88 / 94cc, exhaust BIDALOT RACING FACTORY low passage for YAMAHA DT, MBK X-limit, PEUGEOT XPS, ....