
Reference: 043004476
AIRSAL Ø47,6mm cylinder head for 70cc AIRSAL T6 aluminum kit on KEEWAY scooter, CPI, ...
ideal in case of breakage, crack, veiling of your old cylinder head!
Banner
Attention parts only reserved for the competition, prohibited on road!
Here is the best value kits 70cc aluminum market. This is the AIRSAL T6 70cc Ø47,6mm. This cheap cylinder does not neglect the quality are the performance, 47,6mm diameter high-end aluminum.
It has 6 transfers of admission and an exhaust with bar. The diagrams are pretty high at admission and low enough to escape making the torquey and not difficult to follow or set. The piston is a mono-segment model with side grease! Clearly this kit has a very good ratio torque / power, it offers plenty of performance while preserving a great strength!
The piston is mono-segment model with chrome domed segment hard, it has side oilers and a light preparation on the rear apron to improve scanning. The finish is really on top. We advise you to align transfers to lower casings engine.
The cylinder head is a high-compression chamber is incoming to have good alignment chamber / cylinder is a good performance head gaskets. The room is a polished hemispheric model. This cylinder head allows you to reconnect if desired antifreeze on your carburetor. It will certainly be less effective than MALOSSI MHR, BIDALOT or Polini ... But there will already very good.
We recommend to accompany this kit with: carburation 19mm (carbon flaps slats 0.30mm or 0.35mm), crankshaft and reinforced bearings, exhaust racing, candle racing ...
The pack contains:
X1 Cylinder
X1 Cylinder
X1 Piston
X1 Segment
1X Piston Pin
2X piston Clips
X1 Pack seals
X1 hardware
X1 Instructions
Optional we offer a preparation course 1, this preparation is a modification of the channels and the exhaust port by increasing the charts and improvement of the duct, it increases the cylinder performance. Improved piston and bottom skirt is also included in the amendment. Allow a little extra time for this preparation!
Itself on:
BENELLI Pepe
BENELLI Quattronovex
CPI Aragon
CPI Hussar
CPI Oliver
CPI Popcorn
EXPLORER Cracker
GARELLI Tiesse
Hüpper Montecarlo
KEEWAY F-act
KEEWAY Matrix
KEEWAY Goccia
KEEWAY Hurricane
KEEWAY Pixel
KEEWAY RY8
Reference: 043004476
ideal in case of breakage, crack, veiling of your old cylinder head!
Reference: 063004476
A good quality piston comes complete for refurbishment of your cylinder.
Reference: 013002476
A review kit and worked while keeping a reasonable price and lifetime extension cord.
Reference: EQ-756
A high performance 70cc engine with lots of torque for KYMCO quads and scooters with 50 cylinder admission. Delivered with its cylinder head.
Reference: 125.0008
Strong and powerful, ideal to give punch to your scooter!
Reference: CIL-756
Kit 70cc coupleux allowing a good gain of performances on your quads 50 KYMCO and scooters with admission on cylinder.
Reference: 3113066
A powerful kit is very solid that can reach more than 25 000km without problem.
Reference: P400099100002
A very powerful kit and high quality for your KEEWAY scooters, CPI, GENERIC 50cc 2T ...
Reference: 013006476
Excellent kit that is placed between his little brother AIRSAL luxury and his big brother AIRSAL T6.
Reference: 083000
High performance kit of high quality, delivered with its cylinder head for your scooters HYOSUNG, AGRALE, ATALA, SIAM ... 50cc 2T.
Reference: EQ-713
Strong and powerful, ideal to give punch to your scooter!
Reference: 3113067
A kit without cylinder head but that mounts with original cylinder head for a low price while maintaining performance.
Reference: 02160246
Escapement barrete, piston mono-segment, 46mm in diameter! A good little monster power!
Reference: CIL-713
Ideal for refurbishment resume without a complete kit, delivered without cylinder head.
Reference: P400099100001
A very powerful and high quality kit for your KEEWAY, CPI, GENERIC 50cc 2T scooters ... RACING version with barrel exhaust and flat cap piston!
Reference: 31 9987
A torquey and solid kit for your 50cc 2-stroke scooter!
Reference: 166.0108
A high engine with an excellent quality / price / performance ratio! For us, one of the best in the market in 70cc for Keeway, CPI ... scooters.
Reference: 021606476
The cheapest aluminum cylinders, made in spain, AIRSAL is good and offers good performance for a price réduit.a