Reference: 216.0101
POLINI exhaust pipe for SACHS, ZUNDAPP, MINARELLI P4 & P6
The POLINI exhaust tube for your old mopeds has gearbox.
Banner
Here is the complete kit from POLINI for enthusiasts of old SACHS motorcycles. Delivered 100% complete as presented, it will allow you to refurbish your high engine efficiently. POLINI offers a high quality set both in terms of the materials used and the finish of the transfer ducts, exhaust .... This kit will offer a lot of performance both in torque and in high revs. 39.6mm stroke version. Photo and more complete description to come.
As an option we offer a stage 1 preparation, this preparation is a modification of the channels and the exhaust port by increasing the diagrams and improving the duct, it increases the performance of the cylinder. An improvement to the piston and the bottom of the skirt is also included in this modification. Allow a little extra time for this preparation!
Specific References
Reference: 216.0101
The POLINI exhaust tube for your old mopeds has gearbox.
Reference: 215.0190
An ideal intake pipe because it can take a lot of carburetors and is changeable!
Reference: 271.0003
Piston pin Ø14mm for engine THOR or S6000 on SACH.
Reference: 64266.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 4 transfers with a long stroke crankshaft.
Reference: 003800/1
Very high quality 80cc kit, complete with valves and pipe for period MORINI engines!
Reference: 42307.00
A high-performance and full high special range for motor KREIDLER RS 50 SUPER.
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 010500/1
A whole 100% complete, in ATHENA 60cc 42mm diameter. Rare coins, very few are still on sale. MINARELLI P4, P4R, P6, TESTI, MOTRON ... Out of production!
Reference: 64263.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 2 transfers with a long stroke crankshaft.
Reference: 53495.00
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Reference: 85438.00
A 70cc kit for ZUNDAPP air cooling for miniterm engines.
Reference: 53488.00
A high performance high-end motor special race 44mm for Minarelli P6! Fixing the exhaust with 3 screws, for RADIAL SYSTEM.
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 64425.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 64165.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12 with 4 transfers with a long stroke crankshaft.
Reference: 020000
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 85445.00
The high complete engine with cylinder head, 70cc, ZUNDAPP for air cooling, small model valves!