Reference: 85210.05
Pipe Ø20mm X 24mm PARMAKIT for motorcycle ZUNDAPP, HONDA MB, MT, MTX 50cc ...
Ideal for installing a carburetor PHBG 19 to 21mm on your motorcycle HONDA, ZUNDAPP ....
Banner
Ideal to start afresh with a complete and powerful engine on your ZUNDAPP like the CS50, KS50 ... 46mm X 46mm
Air intake cooling with flaps, large model otherwise called in Italian SUPERTERM LAMELLARE!
Here is the kit Ø45mm, 70cc, with its cylinder head, its piston vertex mono-segment, 4 transfers to the admission, cylinder in aluminum.
It even comes with its choice of intake pipe for carburettor I DELLORTO (24mm PHBG RIGID and internal fixation 20mm) or BING (fixing 26mm, internal 20mm too).
Optionally we offer a stage 1 preparation, this preparation is a modification of the channels and exhaust light by increasing the diagrams and improving the pipe, it increases the performance of the cylinder. An improvement of the piston and skirt stocking is also included in this modification. Allow a little extra time for this preparation!
Reference: 85210.05
Ideal for installing a carburetor PHBG 19 to 21mm on your motorcycle HONDA, ZUNDAPP ....
Reference: 85211.05
Ideal for installing a carburetor 19 has 24mm on your motorcycle HONDA, ... ZUNDAPP.
Reference: 85210.12
High quality guaranteed with molded aluminum base and strips of karbonit thickness 0,30mm.
Reference: 85206.04
High quality cylinder head 70cc PARMAKIT kit for ZUNDAPP SUPERTERM, CS50, KS50 ...
Reference: 85211.00.pr.st.1
The high engine without cylinder head, 70cc, for ZUNDAPP air cooling, big model with flaps!
Reference: 85210.02
Spare piston for 70cc kit on ZUNDAPP SUPERTERM LAMELLARE CS50, KS50 ...
Reference: 85210.03
Pack of complete seal PARMAKIT for kit 70cc on your motorcycle ZUNDAPP SUPERTERM LAMELLARE CS50, KS50 ...
Reference: 003100
Very torquey, robust and powerful kit for ZUNDAPP!
Reference: 133.6005
The kit POLINI SERIE 6000 reproduced for the passionate ones! For 42mm stroke.
Reference: 168.6006
The POLINI SERIE 6000 kit reproduced for enthusiasts! For 41.6mm stroke.
Reference: 64263.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 14mm with 2 transfers with a long stroke crankshaft.
Reference: 64165.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12 with 4 transfers with a long stroke crankshaft.
Reference: 85207.00
The complete kit 70cc for ZUNDAPP with its cylinder head!
Reference: 010500/1
A whole 100% complete, in ATHENA 60cc 42mm diameter. Rare coins, very few are still on sale. MINARELLI P4, P4R, P6, TESTI, MOTRON ... Out of production!
Reference: 063600
ZUNDAPP is very robust and powerful!
Reference: 85306.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling for miniterm engines.
Reference: 64432.00
A complete high-performance high-end engine special for SACHS 503 and 504 with a 14mm axle with 2 transfers with a long stroke crankshaft.
Reference: 073600
80cc kit with inclined admission, more practical for certain carburetion assemblies!
Reference: 85445.00
The high complete engine with cylinder head, 70cc, ZUNDAPP for air cooling, small model valves!
Reference: 53490.00
A high-performance top special range 42mm stroke motor Minarelli P6! Exhaust mounting by 3 screws for RADIAL SYSTEM.
Reference: 42105.00
Kit very torquey, robust and powerful for KREIDLER FLORET HP 5.2.
Reference: 64445.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 4 transfers with a short stroke crankshaft.
Reference: 073800
The most powerful kit on the market for SACHS has cylinder head connected to the cylinder! Full version with clamshells!