Reference: 64430.00
Kit 70cc Ø45mm aluminum PARMAKIT axis 12mm for RS 503 504 SACHS long race
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Banner
A real performance monster! Here is the ATHENA HYPER RACING kit for SACHS machines with integrated cylinder head. This kit has an excellent architecture, the cylinder is clamshell and has relatively high diagrams, the system has flaps offering more torque-based rpm and much more power in addition to a reduction in fuel consumption. The piston is uhn mono segments to allow the highest speeds! ATHENA is none other than EUROCILINDRO, the quality of the aluminum and the nicasile treatment are at the top of the top! Delivered with instructions, joints, screws, axle, segment, valves, clips ... And 2 intake pipes! One to mount a 15 or 16 SHA, the other to mount a 17.5 to 21mm in PHBG!
Mounts on :
Sachs BATAVUS 50 - Motorcycles-mopeds
Sachs CITY 50 - Motorcycles-mopeds
Sachs HERCULES PRIMA 5 50 - Motorcycles-mopeds
Sachs KARSTADT 50 - Motorcycles-mopeds
Sachs M1 50 - Motorcycles-mopeds
Sachs M2 50 - Motorcycles-mopeds
Sachs M3 50 - Motorcycles-mopeds
Sachs M4 50 - Motorcycles-mopeds
Sachs M5 50 - Motorcycles-mopeds
Sachs MX1 50 - Motorcycles-mopeds
Sachs OPTIMA 3S 50 - Motorcycles-mopeds
Sachs RIXE 50 - Motorcycles-mopeds
Sachs TORROT 50 - Motorcycles-mopeds
Reference: 64430.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12mm with 2 transfers with a long stroke crankshaft.
Reference: 30132.00
Kit very torquey, robust and powerful for GUZZI DINGO SPORT 50cc 2T.
Reference: 063600
ZUNDAPP is very robust and powerful!
Reference: 020000/1
The ATHENA cylinder, piston, cylinder head, Ø48mm kit for SACHS CORSA LUNGA 50.
Reference: 012002435
A complete set of quality. Guaranteed performance!
Reference: 54272.00
Piston cylinder for FBM engine, FBM for FABRICA BOLOGNESE MOTOCICLI was the association of MINARELLI and MORINI!
Reference: 85206.00
The piston-cylinder without cylinder head 70cc for ZUNDAPP air cooling as the CS50, KS50 ...
Reference: 003800
80cc kit of very high quality, complete with valves and pipe for motorization MORINI era!
Reference: 64266.00
A high-performance high-end special engine for SACHS 503 and 504 in axis of 12mm with 4 transfers with a long stroke crankshaft.
Reference: 074000/1
Very good 70cc kit for SACHS integrated cylinder head! Available with or without intake pipe.
Reference: 53495.00
The latest parmakit for 44mm travel on the MINARELLI P6 engine. Delivered with its cylinder head, exhaust fixing with 3 screws (radial system).
Reference: 64165.00
A high-performance and full high special range for motor SACHS 503 and 504 in axis of 12 with 4 transfers with a long stroke crankshaft.
Reference: 010500/1
A whole 100% complete, in ATHENA 60cc 42mm diameter. Rare coins, very few are still on sale. MINARELLI P4, P4R, P6, TESTI, MOTRON ... Out of production!
Reference: 42307.00
A high-performance and full high special range for motor KREIDLER RS 50 SUPER.
Reference: 53490.00
A high-performance top special range 42mm stroke motor Minarelli P6! Exhaust mounting by 3 screws for RADIAL SYSTEM.
Reference: 42115.00
Very torquey, robust and powerful kit for KREIDLER FLORET HP 4,8.