Reference: 10871
REPLAY intake pipe 45° angle for PWK carburettor from 21 to 34mm on mécaboite engine DERBI euro 1/2/3
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Banner
Here is the latest POLINI Evolution adjustable swivel pipe for mécaboite driving DERBI euro 1, 2 & 3! This pipe is really at the top, first you orient it as you wish to place the carburetor as you want! Its position is planned for the big carburettors POLINI CP and its internal diameter also (28,5mm, for carburettor of 23 and 24mm).
Its fixing diameter is from Ø23 to 25mm. To avoid vibrations and harmful jolts, the sleeve is in specific viton. Rigid enough for the pipe to crack and not break when tightening. Even aesthetic side we feel that POLINI has really cared for this room to the maximum. No need to put a seal, a seal is pre integrated to the junction, moreover it is delivered with instructions, screws ... Clearly, thanks to a perfect diffusion, a absorption of the vibrations, a good position ... The gain of performance will be well present!
-For POLINI carburettors CP 23 and 24.
-Internal diameter 28.5mm.
-Diameter fixing 23 to 25mm.
-Tilt angle 30 °.
-Original 360 °.
-Special for mécaboite DERBI.
A = Ø28.5mm
B = 23 -> 25
C = 30 °
Reference: 10871
A very well finished pipe that will absorb vibrations and all this at a low price. For 24mm to 34mm PWK carburettors!
Reference: 487209
A good quality pipe with an almost perfect finish for a price more than affordable!
Reference: 23120.20
Complete intake kit and high-performance 30mm diameter for your mécaboite DERBI.
Reference: CL02
A model of competition that you will greatly improve the performance of your DERBI.
Reference: 215.0462
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 494635
Optimize the performance of your mécaboite!
Reference: 02 6639B
An intake pipe designed for large carburetion This pipe is short for faster recovery.
Reference: 215.0463
For an improved admission and a gain in performance! Adjustable 360 ° with tilt angle at 20 °.
Reference: 1772
A very well finished pipe that will absorb vibrations and all this at a low price. In addition to this, you need to know more about it.
Reference: 215.0455
Ideal for equipping a large, precise and efficient engine configuration! 360° swivel with 20° tilt angle.
Reference: 215.0428
Ideal for equipping a large, precise and efficient engine configuration! 360 ° swivel with 20 ° tilt angle.
Reference: 140619
An original type intake pipe, good quality and less expensive than the original in concession.
Reference: 215.0417
Pipe 21mm POLINI high quality, ideal for laying a PHBG 19 or 21mm.
Reference: 25527
Pipe of admission with rigid and flexible venturi sleeve, excellent quality, good price!
Reference: 9931740
TPR intake kit, 360 ° swivel, flexible assembly specially designed to accompany an OKO, PWK POLINI, FURYTECH, KEIHIN ... 24 to 28mm carburetor on AM6 & DERBI Ø34mm mounting.
Reference: 215.0439
Special intake pipe for POLINI CP 23 and 24mm carburetors. 360 ° swivel with 40 ° tilt angle.