- -20%
Reference: CB.68.2
Crankshaft, connecting rod assembly race origin ITALKIT Sport vertical axis Ø10mm minarelli scooter (booster rocket, bws)
Ideal with a high engine of origin or small kit 50 / 70cc.
Banner
Here is the strongest crankshaft from ARTEK for your MINARELLI Vertical. A reinforced, balanced model is in full masses, it is really intended for the reinforcement of the low engine and the performance, it is certainly the most studied crankshaft on the market.
What are the differences with the K1? The connecting rod, the materials used, the tolerance to high speeds .... More clearly the reinforcement and the balancing which are even more neat!
The steels used are of the highest quality, they are treated and well hardened, the balancing is dynamic and really neat! The connecting rod is a very high-end model lightened in H with grease at the head and small end.
Clearly, this crankshaft will withstand most very equipped engines. Capable of going up to 15,000 revolutions, it will hold without worry on an 80cc MHR TEAM with internal rotor ignition for example.
Characteristics:
-Masses: full
-Soies: Ø20mm as the origin
-Bielle: reinforced original size 80mm
-Cage: reinforced silver
-Course: origin 39.20mm
Mounts on the following Minarelli Vertical motor scooters:
-APRILIA AMICO - SR (before 1993 only) ...
-FANTIC BIG WHEEL ...
-GARELLI PONY - SR ...
-ITALJET BAZOOKA - PISTA - REPORTER - SCOOP - YANKEE - ASCOT - ASTRA ...
-LEM FLASH - GHIBLI - TORNADO - TORNADO SS1 ...
-KOTIR SR ...
-KTM CHRONO ...
-MBK BOOSTER - NAKED - ROCKET - NEXT GENERATION (NG) - CW - SPIRIT - STUNT - TARGET - TRACK ...
-YAMAHA BWS - BWS NG - BWS ORIGINAL - BWS NAKED - CRZ - CT - SLIDER - SPY - ZUMA ..
And other models ...
Reference: CB.68.2
Ideal with a high engine of origin or small kit 50 / 70cc.
Reference: 090803A
To strengthen its base engine cheaply and accompany a high engine of origin or small kit!
Reference: 53 8368
Reinforced crankshaft for the old vertical 2T scooter minarelli.
Reference: S410485320006
Original ATHENA type crankshaft for your APRILIA , BENELLI, BETA scooters... For Ø10mm piston pin!
Reference: 76501.14
The Racing version with PARMAKIT for a low engine strengthened without problems!
Reference: 80030
A linkage of perfect competition to strengthen your lower engine dramatically!
Reference: 19875
A reinforced crankshaft at a low price but very well balanced. Ideal for small kit 70cc or 50cc.
Reference: 6030036
Crankshaft type origin of very good quality for els old vertical minarelli engines.
Reference: 53 8319
Crankshaft reinforced for the former vertical scooter minarelli 2T.
Reference: 53 7621
High end to equip your low engine and support all possible engine speeds!
Reference: 5WWE14000200
Ideal for refurbishing your original low engine or slightly prepared.
Reference: 210.0049
Reinforced crankshaft of very high quality POLINI!
Reference: 413
A very good quality mid-range crankshaft designed to go up to 14,000 revolutions!
Reference: 76515.14
High-end race origin for scooter engine Minarelli Vertical!
Reference: 6030033
Crankshaft type origin of very good quality for els old vertical minarelli engines.
Reference: 441277
An ideal way for radical and strengthened your low engine scooter minarelli vertical.