Here is the EBR RACING fork, it is delivered as in the photo, that is to say complete with the upper and lower triple clamps as well as the headlight brackets and the handlebar fixing (handlebar bridge).
This black fork can give a nice style to your PEUGEOT 103 or even MBK 51, do not hesitate to look at the technical characteristics if you are not sure of the assembly!
Above all, it has a low price! Its diameter of 30mm for the top and 35mm for the bottom except at the joints where the diameter is 43mm. It is made in Italy, it is also improved compared to the original fork for better handling and better absorption of irregularities, bumps...
It has a single brake block. It does not have a bracket to fit a disc brake caliper.
-Material: Chrome steel
-Stroke: 85mm
-Delivered with: headlight brackets, triple clamps, handlebar bridge, speedometer support...
-Diameter of the tubes: 30mm for the top and 35mm for the bottom
-Tees tube diameter: 25mm
-Height adjustable: yes
-Adjustment of the between-axis of the tees: Yes from 15 to 20.5cm
-Brake block: Yes, reversible on one side only, thickness 8mm, height 15mm
-For wheel axle: Ø12.5mm maximum
- Between axis of the tubes: 11.7cm maximum
-Total length of the tubes: 70cm at the lowest (cutting of the springs possible)
-System: standard springs
-Fixing the mudguard: Yes, 2 screws Ø6mm on each side, between axis of 18 to 50mm adjustable
-Recommended maintenance: Lubrication every 5000km, belgom chrome and fine steel wool in case of rust.
.png)
.png)
