Reference: VAR350PBV40
copy of YASUNI AXIAL variator for maxiscooter KYMCO 300 GRAND DINK from 2016 to 2020
New generation YASUNI for your KYMCO maxiscooter!
PEUGEOT 103
MBK 51
MOTOBECANE
PIAGGIO CIAO / VELOFAX
PEUGEOT FOX
HONDA CAMINO, PX, PXR...
DERBI VARIANT
SOLEX
PUCH
MINARELLI AM6
Low-pass exhaust pipe
High-pass exhaust pipe
DERBI Euro 3 / 4 / 5
DERBI Euro 1 & 2
MINARELLI P4 & P6
MINARELLI RV6, RV5, RV4, RV3
SUZUKI SMX, RMX, TSX
YAMAHA TY, RD, DT, MX
HONDA MB, MT, MTX, MBX, NSR R
YAMAHA CHAPPYBanner
Ideal for increasing the performance of your maxi-scooter Aprilia, Piaggio, GILERA ... throughout the speed range, this drive MULTIVAR 2000 has many improvements compared to the original one, all of first it comes with a set of 9.5gr rollers and a hard torque corrector spring so that the rear pulley follows and does not let the variator close directly, the variator has a movable alloy cheek light and strong, with a cutting angle studied for a better climb.

The steel roller cage is it very studied for a better support of the rollers against the mobile cheek, even the variator barrel and the separation sliders are specific. Clearly, this drive will close at more or less high speed depending on the set of rollers you use, the one that is delivered already allows a good gain in power by using a higher engine speed range, but above all, it will close correctly. and longitudinally in order to fully use the power of your scooter. The best is to accompany this pack with the clutch and the MALOSSI belt.
Mounts on (MALOSSI list):
BENELLI CAFFèNERO 150cc 4Temps LC euro 3 (QJ158MJ)
HONDA @ 125cc 4Time LC
HONDA @ 150cc 4Time LC
HONDA DYLAN 125cc 4Temps LC
HONDA DYLAN 150cc 4Temps LC
HONDA SH - SH Scoopy 125cc 4Temps LC
HONDA SH - SH Scoopy 150cc 4Temps LC
HONDA SH I 125 ie 4Temps LC euro 3 after 2009 (JF14E)
ONLY for vehicles WITH Malossi CYLINDER AND electr. FORCE MASTER
HONDA SH I 125cc ie 4Temps LC before 2008
ONLY for vehicles WITH Malossi CYLINDER AND electr. FORCE MASTER
KEEWAY LOGIK 125cc 4Time LC euro 3 (QJ153MI-2)
KEEWAY OUTLOOK 125cc 4Temps LC (QJ153MI-2)
KEEWAY OUTLOOK 150cc 4Temps LC (QJ158MJ)
KEEWAY SILVER BLADE, SILVERBLADE 125
Reference: VAR350PBV40
New generation YASUNI for your KYMCO maxiscooter!
Reference: 241.733
A very good quality inverter with super good performance, special for maxi scooter PIAGGIO MEDLEY and VESPA GTS EURO 4 125 and 150.
Reference: 5120424
A complete variator pack, the MULTIVAR 2000 from MALOSSI comes with a thrust spring to stiffen the torque corrector and 1 set of adjustment rollers.
Reference: 241.645
A drive of very good quality with super good performance, special for maxi scooter PIAGGIO, APRILIA, DERBI, VESPA, MALAGUTI, PEUGEOT ... 250cc and 300cc.
Reference: 5115308
A very good sport variator for maxi scooters PIAGGIO BEVERLY Sport Touring 350 and X10.
Reference: 241.699
Excellent sport variator of POLINI for PIAGGIO BEVERLY and X10 350cc.
Reference: 241.712
Variator POLINI sport for HONDA FORZA, SH and BENNELLI CAFFENERO 125 or 150cc.
Reference: 286885A
A complete drive, at a good price for felt performance!
Reference: 5111885
A complete variator pack, the MULTIVAR 2000 from MALOSSI is delivered with a thrust spring to harden the torque corrector and 1 set of adjustment rollers.
Reference: 241.663
Very good variator for GILERA GP and APRILIA SRV 850, acceleration and high performance guaranteed!
Reference: 241.718
Complete POLINI sport variator delivered with the ventilated fixed cheek!
Reference: 5117431
Drive specifically designed to operate on the VESPA and MEDLEY 125, 150cc 4T with the new EURO 4 standards from 2017!
Reference: 9922430
Reliable and solid! High-end controller for your maxi-scooter 400cc with a real performance gain.
Reference: 5114258
One of the best known variators in the world of the 2 wheel compared to it's performance and its solidity.
Reference: TM55
A well-known drive, the TURBOKIT by J.COSTA offers a nice performance boost and is available for your SCOOTERS 125 KEEWAY, KINROAD, CLIPIC ...
Reference: 5111572
A complete variator pack, the MULTIVAR 2000 from MALOSSI is delivered with a thrust spring to harden the torque corrector and 1 set of adjustment rollers.