Reference: 2522
Carburettor DELLORTO PHBG 19 BS choke lever, flexible, without separate greasing
The BS version on 19mm PHBG, flexible, lever choke! High quality certified!
Banner
If you want to preserve low consumption while having more performance than with a SHA or other model for endurance or the road for example, the PHBG model will be a very good compromise. This low-cost carburetor is of very high quality and has a multitude of settings: wealth screw, idle jet, needle valve… This model is the CS (also exists in BD, AD, DS, DD, black models edition, or BS), this 19.5mm is therefore just above the 19mm model. It is rigidly mounted with a lever choke, you can also pass it as a cable choke without difficulty.
Compared to the SHA carburetor, this model is much more precise, efficient at recovery, acceleration and top speed. This model has a separate lubrication, you are not obliged to use it and it is original delivered with a shutter on this socket. This model also comes with a black intake tulip! This tulip improves performance and is Ø60mm, so you can put a Ø60mm fixing filter or remove this tulip to ask a filter Ø PHBG Ø32mm standards.
Advice : accompany it with a 19 or 20mm pipe, carbon valve strips, pipe as much as possible aligned with the valves, you can simply use an original air filter but also a horn. Plan a range of nozzles from 76 to 95 depending on the filter used.
The carburetor is delivered as such :
Main jet small standard pitch: 85
W09 needle
Needle well AN 262
Idle jet 48
Choke nozzle 60
Float in 4 grams
These accessories can be changed for better settings, although these carburetors are very well preset. All spare parts and adjustments can be found here.
Reference: 2522
The BS version on 19mm PHBG, flexible, lever choke! High quality certified!
Reference: 2523
The real DELLORTO PHBG in 18mm!
Reference: 1179
The DD version on PHVB 19mm, flexible, cable starter! High quality certified!
Reference: 2506
The AS 1 version of the real DELLORTO carburettor PHBG, rigid, choke lever without separate lubrication or depression.
Reference: 2587
The AD version of the PHBG DELLORTO, rigid, choke lever and without separate lubrication or depression.
Reference: 201.1903
The best 19mm carburetor from POLINI and we can say about the whole market! An evolution version CP for maximum performance!
Reference: 2911
The ultimate and ultra racing version of the 19 PHBG, of much better quality with parameters revised upwards, Red Edition model!
Reference: 467793
A carburetor much better than a TNT but less well finished than a DELLORTO, but it will still provide a good filling of your engine for a relatively low price.
Reference: 02631
The DS version of the 19mm DELLORTO VERITABLE PHBG. This flexible version has a cable choke, a separate lubrication possibility, without vacuum outlet.
Reference: 473460
A good quality carburetor for its price which will fuel your engine well but which will not have as good a finish as a DELLORTO.
Reference: 134071
Cheap and quality carburettor because it is between the TNT and the DELLORTO .
Reference: 2695
The most racing version of the carburettor DELLORTO RACING BLACK EDITION, flexible, choke cable, possibility of separate greasing.
Reference: 201.1902
A very good high quality carburetor at low price, with separate lubrication and vacuum plugs! Choice of cable or lever choke!
Reference: 201.1904
CP POLINI 19mm version in rigid mounting Indispensable for a prepared engine configuration.
Reference: 2513
The AD version of the PHBG DELLORTO, rigid, lever choke and without separate greasing.
Reference: 2594
The most racing version after the black edition of the flexible 19mm PHBG! Aluminum tank with plug, inlet tulip ... Screw-on valve cover!