Reference: 01486_72
																					
																		
Main Jet For DELLORTO Carburetor Small Pitch 5mm Thread 8mm Length Genuine (INC Certified)
Certified DELLORTO INC! Choose real DELLORTO quality!
PEUGEOT 103
MBK 51
MOTOBECANE
PIAGGIO CIAO / VELOFAX
PEUGEOT FOX
HONDA CAMINO, PX, PXR...
DERBI VARIANT
SOLEX
PUCH
MINARELLI AM6
Low-pass exhaust pipe
High-pass exhaust pipe
DERBI Euro 3 / 4 / 5
DERBI Euro 1 & 2
MINARELLI P4 & P6
MINARELLI RV6, RV5, RV4, RV3
SUZUKI SMX, RMX, TSX
YAMAHA TY, RD, DT, MX
HONDA MB, MT, MTX, MBX, NSR R
YAMAHA CHAPPYBanner
				
				
					
	        
          
          
          
          
          
          
          
          
          
          The SHA 14.14R carburetor is a simple model, less known than 15.15 but just as functional.
If you are looking for a carburetor that does not have separate lubrication, very simple to adjust, solid, cheap, which consumes little and makes little noise! This carburetor will be perfect.
This version R is a version with manual cable starter that does not have a separate lubricating arrival with an aluminium fuel pipette outright.
High quality guaranteed, real carburetor DELLORTO, it was even used as an original climb on some machines, in this case it is planned to be mounted on MBK 51 Magnum Racing, Peugeot 103 SPX-RCX-CLIP.
Featuring an air box as shown in the picture, as well as the 2 cables (A accelerator & a starter) also visible!
This carburettor is equipped with these parameters:
-Standard sprinkler DELLORTO 60 in small steps
- 3.5g float
Summary:
-Carburettor fixation diameter on inlet pipe: 19mm
-Mounting: rigid
-Separate greasing: no
-Starter cable
-Diameter of the carburettor 14mm
-Filter with carburettor with right aluminium pipette
Reference: 01486_72
																					
																		
Certified DELLORTO INC! Choose real DELLORTO quality!
Reference: 02838_00
																					
																		
Ideal in case of problem, breakage or loss of your old part!
Reference: 53129_00
																					
																		
Ideal in case of loss or to pass your cable as desired.
Reference: 53036_00
																					
																		
Ideal in case of loss or change the passage of your cable.
Reference: 09249_00
																					
																		
The pipette spare black plastic, angled 45 ° for your carburettors DELLORTO SHA.
Reference: 06109_00
																					
																		
The spare fuel filter for your SHA carburettors, PHBL, PHBN, PHBE ...
Reference: 126140
																					
																		
Delivered without its spring idle screw for DELLORTO SHA.
Reference: 04190_00
																					
																		
Indispensable in case of wear or loss of your old screws.
Reference: 01476_00
																					
																		
The original cap of all DELLORTO carburetor. Perfect for any loss or breakage of your old cap.
Reference: 52533
																					
																		
A complete gasket set to refurbish your DELLORTO SHA.
Reference: 13412_00
																					
																		
Real piece of ideal replacement in case of breakage, wear ... DELLORTO quality.
Reference: 06122_02
																					
																		
The replacement for your float carburettors DELLORTO SHA, SHB and SHBC ...
Reference: 11837_00
																					
																		
Indispensable for the maintenance of your tank on carburettor DELLORTO SHA.
Reference: 01104_00
																					
																		
Arises directly in the plug cover, also available in angled with adjuster.
Reference: 08773_00
																					
																		
Spare parts needed in case of breakage, wear ... DELLORTO quality for all carburettors SHA.
Reference: 06108
																					
																		
The replacement bushel for SHA carburettor! Available in several sizes for Ø14, 15 and 16 SHA carburetors.
Reference: 360.0003
																					
																		
Boxed jets, checked, certified for your DELLORTO SHA, PHBG carburettors and many others requiring Ø5mm.
Reference: 1263
																					
																		
The tension adjuster which is placed at the end of your tubes.
Reference: 1317
																					
																		
The replacement seal for your valve covers on DELLORTO SHA.
Reference: 126123
																					
																		
Ideal in case of leakage tank or just a good refurbishing!
Reference: 1318
																					
																		
Ideal for loss, breakage, soft shot into your throttle grip.
Reference: 123606
																					
																		
The pilot screw spring for your carburettors DELLORTO SHA.
Reference: 506367
																					
																		
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 10146_00
																					
																		
Replacement nylon ring which allows sealing and tightening on your intake pipes with your SHA carburator in rigid mounting!
Reference: 126110
																					
																		
A replacement cover for your carburettors DELLORTO SHA all models.
Reference: 127427
																					
																		
Spare clamp nut for carburettor DELLORTO SHA all models.
Reference: 0630500_536
																					
																		
Replacement screws to clamp on all models carburettors DELLORTO SHA.
Reference: 06475_00
																					
																		
The pipette spare aluminum right version for your carburettors DELLORTO SHA.
Reference: 09604_00
																					
																		
Cover with seal and replacement spring for your carburettors DELLORTO SHA all models.
Reference: kit_carburation_av10_sha_droit_dellorto
																					
																		
Quality 16mm carburation kit for MBK 51 engine with straight pipe!
Reference: kit_carburation_av10_sha_droit_eco
																					
																		
Economical quality carburetion kit in 15mm for MBK 51 engine with straight pipe!
Reference: 201.1502
																					
																		
Finally a carburetor of 15mm resolutely racing, with separate greasing possibility and depression, and choke with cable or tirrette with the choices! Ideal to keep its original air box fixing 34 to 36mm.
Reference: NK201.38
																					
																		
Carburettor type SHA 13mm DELLORTO with lever starter but no possibility of separate lubricating!
Reference: 2045
																					
																		
The real SHA 15mm from DELLORTO with a cable choke and without separate lubrication!
Reference: 2265
																					
																		
True SHA 14.14R carburetor from DELLORTO, R model with cable starter and without separate lubricating. Rare product on the market, almost impossible !!
Reference: 2183
																					
																		
Genuine SHA 14.14 carburetor from DELLORTO, model L with aluminum pipette, a lever choke and without separate greasing.
Reference: 2044
																					
																		
Genuine SHA 13mm DELLORTO carburettor with lever choke but without the possibility of separate lubrication!
Reference: 138705
																					
																		
An Asian copy of SHA 15.15, decent quality at a very low price!
Reference: 165812
																					
																		
SHA carburettor TUN 'R with high quality!
Reference: 2508
																					
																		
The simple version of the 15mm DELLORTO carburetor! The flexible mounting PHBG with lever choke.
Reference: kit_carburation_av10_sha_coudée_eco
																					
																		
Economical quality carburetion kit in 15mm for MBK 51 engine with bent pipe!
Reference: kit_carburation_av10_sha_coudée_dellorto
																					
																		
High quality carburation kit in 16mm for MBK 51 engine with bent pipe!
Reference: 2616
																					
																		
The most racing version of the 15mm DELLORTO carburettors! The flexible mounting PHBG with aluminum tank, quick change plug, intake tulip ...
Reference: 201.1501
																					
																		
Finally a carburetor of 15mm resolutely racing, with separate greasing possibility and depression, and choke with cable or tirrette with the choices!
Reference: 2046
																					
																		
True SHA carburetor 13mm DELLORTO with lever starter but no possibility of separate lubricating!