Banner
The simple version of the 15mm DELLORTO carburetor! The flexible mounting PHBG with lever choke.
The 15 PHBG BS carburetor is a racing carburetor with flexible mounting. This model is different from the others, for example by its unthreaded Ø33mm air filter attachment. It will therefore be ideal for people who wish to install a flexible 15 carburetor while preserving their original air box (prepared if possible). The choke is a lever model, it can of course be replaced by a cable choke if desired. The BS model remains a racing model made for performance. We recommend it especially for those who want to combine quality / performance and low consumption such as on the road or in endurance competitions, regulated ...
Summary :
Carburetor diameter: Ø15mm
Pipe side fixing diameter: Ø24mm with anti-slip lip
Air filter fixing diameter: Ø33mm not threaded
Starter: lever
Assembly: flexible
Separate lubrication: no (possibility on pipe ..)
The carburetor is delivered as such :
Needle well: AN 266
Main jet: 90 in small standard pitch
Idle jet: 50
Choke jet 60
Float 4 grams
90 ° elbow short throttle cable tube
Reference: 2043
The real SHA 15mm from dellorto with a lever choke but without the possibility of separate lubrication!
Reference: 2045
The real SHA 15mm from DELLORTO with a cable choke and without separate lubrication!
Reference: 2518
The rigid version of the DELLORTO 15mm carburettor in PHBG, with a lever choke and without the possibility of separate lubrication.
Reference: 2013
The real SHA 15mm dellorto with a choke lever and a possibility of separate greasing!
Reference: 201.1501
Finally a carburetor of 15mm resolutely racing, with separate greasing possibility and depression, and choke with cable or tirrette with the choices!
Reference: 2616
The most racing version of the 15mm DELLORTO carburettors! The flexible mounting PHBG with aluminum tank, quick change plug, intake tulip ...
Reference: 6315
The simple version of the 14mm DELLORTO PHVA DD carburetor! The flexible mounting PHBG with lever choke.
Reference: 165812
SHA carburettor TUN 'R with high quality!
Reference: 201.1503
Ideal to accompany a motor origin or slightly prepared CP version POLINI, rigid.
Reference: 201.1502
Finally a carburetor of 15mm resolutely racing, with separate greasing possibility and depression, and choke with cable or tirrette with the choices! Ideal to keep its original air box fixing 34 to 36mm.
The simple version of the 15mm DELLORTO carburetor! The flexible mounting PHBG with lever choke.
