Applicable on PIAGGIO scooter engine (see list below), with rear drum brake. Set of 2 rear brake shoes with MALOSSI springs. Their supports are in special aluminum alloy with Magnesium in order to disperse the heat as well as possible while preserving a maximum solidity (-20% of heat around). The linings are a special 100% asbestos-free process and provide + 30% bite in relation to the origin and -20% wear in relation to the origin.
MALOSSI description :
BRAKE POWER
The new Malossi brake shoes have been designed for mounting on the most important vehicles manufactured in Europe and Japan. Our technicians have studied and tested these jaws so that they respond without difficulty to the loads imposed by extreme use, especially for competition vehicles, for which it is necessary to be able to ensure significant decelerations and a constant output at the lowest temperatures. higher. This is why the BRAKE POWER Malossi jaws have been made in a special aluminum alloy with Magnesium, a special friction material without asbestos, in accordance with the new EEC standards. The new mixtures of friction material respect the environment and their characteristics are incomparably above average; they provide modular and progressive braking, less braking space and very low consumption of friction material per kilometer. The oblique cuts for dust evacuation have been studied and tested over four years in scooter competitions, which always ended with the success of the Malossi teams.
Mounts at the rear on the following scooters :
GILERA EASY MOVING 50 after 1995
GILERA STORM 50 after 1994
GILERA TYPHOON 50 after 1995
PIAGGIO FREE 50 after 1996
PIAGGIO NRG MC2 50 after 1996
PIAGGIO NRG 50 after 1995
PIAGGIO NTT 50 after 1995
PIAGGIO QUARTZ 50 after 1995
PIAGGIO SFERA RESTYLING
PIAGGIO SFERA 50 after 1995
PIAGGIO SFERA 75 after 1995
PIAGGIO ZIP FAST RIDER after 1995
PIAGGIO ZIP after 1995
.png)
.png)
