Air filter, MALOSSI E13 foam horn right (carburetor mounting Ø Ø32 / 38/42/50 / 58,5mm)

The MALOSSI E13 air filter is a model that was expressly designed for competition, tuning, racing spirit ... It has a really neat look with its red foam and its chrome cover impregnated with the lion.

This straight model allows a larger air reserve than the 25 ° model, however it takes a little more space. The expanded polyurethane foam allows perfect breathing combined with really good filtration. With its large volume it allows a good reserve of air.

You will certainly appreciate that the mounting base is made of rubber with the MALOSSI LOGO. In order to offer the best possible performance, this filter is delivered with venturi improvement tulips, this improves the carburetor operation but also allows that there is no step in the intake duct.

There are several models of E13 MALOSSI filter right, to select before purchase. 3 choices are available to you :

1-The Ø32 and Ø38mm model comes with a tulip, mounted without tulip it is made for threaded or non-threaded carburetors in Ø37mm to Ø39mm of air filter attachment like the PHBL, mounted with the tulip it is made for PHBG carburetors 15 to 21mm threaded in Ø32mm! This venturi enhancement tulip is threaded.

2-The Ø42 and Ø58,5mm model is delivered with a flexible tulip (in photo posed on the red carburettor), assembled without tulip it is made for the carburettors or threaded connections or not in Ø57,5 has 59,5mm, assembled with the tulip is made for carburettors threaded or not in Ø 41mm to Ø43mm of air filter attachment! This venturi enhancement tulip is unthreaded.

3-The Ø42, Ø50 and Ø58,5mm model is delivered with two flexible tulips (in photo posed on the red carburetor), assembled without tulip it is made for the carburettors or threaded connections or not in Ø57,5 to 59,5mm, mounted with the first tulip it is made for carburettors threaded or not in Ø 41mm to 43mm air filter attachment! This venturi enhancement tulip is unthreaded. Mounted with the second tulip, it is made for carburettors threaded or not in Ø 49 to 51mm of air filter attachment! This venturi enhancement tulip is unthreaded.

AB	VS	D	E	F
Ø32 & 38mm	-	10mm	103mm	94mm
Ø42 & 58.5mm	-	5mm	103mm	94mm
Ø42, 50 and 58.5mm	-	10mm	103mm	94mm

 

Always remember that flexible tulips must fit into the horn during assembly in order to absorb the walk. You must oil the air filter with a suitable oil more after the installation of a horn, your settings are to be reviewed main jet level.