- -40%
Reference: 0411459
Air filter, horn foams MALOSSI E14 cuts 30 ° (carburizing Ø of fixing Ø32 / 35.5 & 38mm)
A filter often used in competition for that high quality foam and are look neat / racing.
Banner
Ultralight machined aluminum horn, for threaded carburetors, available in 16 sizes shown below. Without even a protective grid at the entrance, it is therefore recommended only on a clean track.
This filter increases the performance by improving the venturi effect, however the noise developed serras increased and more castling.
Available sizes (Ø = fixing Ø and L = horn length) :
Ø32X L 33mm (DELLORTO PHBG threaded)
Ø32X L 64mm (DELLORTO PHBG threaded)
Ø35X L 36mm (MIKUNI)
Ø35X L 60mm (MIKUNI)
Ø38X L 25mm
Ø38X L 70mm
Ø39X L 70mm
Ø40X L 42mm (threaded DELLORTO PHBH, non-threaded PHBL, MIKUNI ...)
Ø42X L 40mm (DELLORTO PHBH unthreaded)
Ø42 XL 58mm (without grid and without thread)
Ø42X L 65mm (DELLORTO PHBH unthreaded)
Ø43X L 33mm (MIKUNI, without grid)
Ø48X L 20mm
Ø48X L 36mm
Ø48X L 57mm
Ø48X L 61mm
Ø50X L 61mm (DELLORTO VHST, KEIHIN PWK, MIKUNI ...)
Ø59X L 37mm (DELLORTO SHA)
Ø55X L 63mm (MIKUNI)
The information next to the sizes is only indicative, you must take the Ø of your carburetor at the level of the air filter attachment !!! You should know that an unthreaded Ø 32mm horn will be mounted on a carburetor with a fixing Ø of 31.50 to 32.50mm. A Ø52mm horn will be mounted on a carburetor with a fixing Ø of 54 to 56mm without problems!
Reference: 0411459
A filter often used in competition for that high quality foam and are look neat / racing.
Reference: 203.0160
For an optimal and improved filtration of your engine with several sizes of fixation to the choices!
Reference: 203.0066
Ideal for positioning your filter at 90 °, a high-end filter for optimal protection of your engine against external impurities.
Reference: 04 3296.K0
MALOSSI E5 air filter with black cover. Available for PHVA, PHBG, MIKUNI, PHBL, PHBH ...
Reference: 343.0035
Ideal to fit your Ø61mm air filter on your POLINI CP carburettor.
Reference: S410000200009
A competition filter with expanded foam that allows a large volume of air and therefore better recovery and performance.
Reference: 203.0029
This POLINI EVOLUTION air filter allows an improved breathing / aspiration of your motor.
Reference: 203.0147
An air filter with a large reserve of air for optimal breathing of your engine!
Reference: 203.1505
Ideal to fit your Ø70mm air filter on your PWK carburetor.
Reference: 203.0062
Ideal for positioning your filter at 30 °, a high-end filter for optimal protection of your engine against external impurities.
Reference: 114010W
MARCHALD FILTERS foam air filter for motorcycle SHERCO 50
Reference: 203.0146
Model with outlet and right attachment, a high quality filter version EVOLUTION 2.
Reference: 203.0093
A competition air filter 90 ° elbow exit, large model upscale with several sizes of attachment to the choices.
Reference: 1413965
A foam that can adapt to all air boxes for optimal air filtering.
Reference: 114010V
MARCHALD FILTERS foam air filter for motorcycle BETA RR 50- 125CC from 2021
Reference: 4YVE445310000
Sleeve to connect the air box to the carburetor of the original YAMAHA TZR and MBK X POWER 50.