Reference: 09814_00
Tulip / venturi improvement adapter DELLORTO Ø32mm threaded X Ø60mm for PHBG
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Banner
There are 51 products.
Active filters
Reference: 09814_00
A tulip which increases the venturi effect and therefore the efficiency of your engine. In addition to this, you need to know more about it.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 4224-82
A tulip which increases the venturi effect therefore the efficiency of your engine.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 53016_00 / B53016B
Kit of complete collar for rigid carburettor PHBG and SHBC!
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 30 3338
Ideal for permanent control of your fuel and your settings with ease.
Reference: 53129_00
Ideal in case of loss or to pass your cable as desired.
Reference: 263991
A complete kit that will allow you to pass your cables as you wish.
Reference: 9482
The replacement cover for your DELLORTO PHBG carburetors except racing black edition.
Reference: 129514
For a refurbishment at a lower cost for a perfect seal.
Reference: 53036_00
Ideal in case of loss or change the passage of your cable.
Reference: 1285
Ideal in case of leakage for a good quality repair at low price.
Reference: 10431
The bowl bottom also called anti-emulsion washer ... Indispensable for the proper functioning of your carburetor and oil / gasoline mixing!
Reference: 1297
A small spring that is important. Ideal for lost or worn for a refurbishment cost.
Reference: 11540
Excellent in the event of a problem or a leak in your carburetor.
Reference: 129517
The only wealth screws for your PHBG!
Reference: 2707
The idle screw without its spring for your PHBG!
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 203.1504
A machined / blue anodized part POLINI for your PHBG carburettors!
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.