Reference: 09779_00
Tank bottom cup on carburettor DELLORTO PHBG and others (small principal jet) not deep model
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Banner
Bowl cup bottom (anti-emulsion washer) for small pitch nozzle of 5mm. Fits between the needle well and the nozzle. Despite the rumors and some say, this is by no means a bridle. Rather a part that allows better mixing of oil / petrol (when it arrives in the tank), which avoids air bubbles and emulsions ... For DELLORTO, PHBG, PHBG racing edition carburetors ... Deep model (also available in not deep model).
Reference: 09779_00
Essential part of your carburettor PHBG for better mixing oil / petrol! Not deep model for jet small step 5mm.
Reference: 343.0021
Ideal in case of loss or to pass your cable as desired.
Reference: 14958_00
Ideal in case of loss or breakage of your old support, bushel socket.
Reference: 05 3733B
Ideal to increase the venturi effect so your performance.
Reference: 52526_77
Ideal for refurbishing your standard PHBG or racing black edition.
Reference: 09811_00
The aluminum racing tank, mounts on all PHBG carburettors, to remove your jets faster, drain faster and get more strength!
Reference: 4477.62
The ring which seals and tightens your intake pipes with your RIGID PHBG!
Reference: 09597_00
The valve spring for your carbs, ideal when the handle returns badly or in the event of loss, wear, breakage...
Reference: 121692
The counter nut that locks your cable tension adjuster on DELLORTO carburettor.
Reference: 09596_00
Ideal in case of loss or breakage.
Reference: AP8106790
A tulip that increases the venturi effect therefore the performance of your engine.
Reference: 53024
The complete richness screw for your PHBG carburettors!
Reference: 18951-53
The replacement cover for your DELLORTO PHBG carburettors, to screw.
Reference: 09444_00
The replacement tank at low prices for your DELLORTO carburettors.
Reference: 506272
Excellent in the event of a problem or leak from your carburetor.
Reference: 10 5397B
Ideal in case of wear, breakage ... of your old MALOSSI tank cap.
Reference: 473464
A very aesthetic tank delivered with its seal and screws for a very good price!